Thank you,
It would be good if you can show your leather finish types.
The refinish is best to match the original finish types.
Black leather finishes could also be in these various finish types:
1] Pure Aniline
2] Semi Aniline
3] NC Pigment
Pictures you see is identified as 3] NC Pigment finish specially for Napa leathers (typically leather from sheep/lamb).
The refinishing is done with color (Pigment-84) follows with topcoat (NC Topcoat-78 satin or matte).
However, used leather has to be cleaned of surface contamination prior to refinishing with Degreaser-2.2 follows with Rinse-3.0
Softening of the leather is done with Hydrator-3.3 follows with Fatliquor-5.0.
Products mentioned is found in this leather care Kit A3.dr
![](http://i300.photobucket.com/albums/nn4/Rogerkoh/Leather%20Doctor%20products/KitA3dr-1.jpg)
Leather Doctor® Kit A3.dr
NC-Pigment Coloring System (11):
Color:
Black,
White,
Ochre,
Tan,
Maroon,
Yellow,
Orange,
Red &
Blue.
Topcoat:
Satin &
Gloss.
Leather Doctor®
NC-Pigment-84
It’s for soft lambskin and napa garment leathers; that forms a discontinuous breathable film for wearing comfort.
This is a lacquer emulsion high performance color coat; strong against UV light than standard pigment.
To provide a more color consistency than aniline dyestuff with its buttery softness warm characteristic.
Leather Doctor®
NC Topcoat-78G
It’s a gloss finish for lambskin and napa leathers.
This is a soft nitrocellulose lacquer emulsion topcoat.
Leather Doctor®
NC Topcoat-78S
It’s a satin finish for lambskin and napa leathers.
This is a soft nitrocellulose lacquer emulsion topcoat.
Roger Koh
[email protected]