Thanks for your continuous interest MJN; you shouldn’t be worried as this is a “leather-safe” system; moreover when your turn comes; with this level of help available you will not be on your own.
Ajvee, the shiny seat can be knocked down with the “satin” topcoat that you have; otherwise you can have it in “matte” too!
Do a test by putting a drop of Prep-7.7; cover it up with cling wrapper and leave it there a day or two; wipe off the Prep-7.7, clean with Cleaner-3.8 and let us know of the spot appearance from the non-treated area?
Another tip for the Hydrator-3.3; to hydrate more effectively; lay tissue paper 2-3 layers over the wrinkle area; spray wet and cling wrapped it; and can be spray repeated over in this manner.
To know if the hydrator penetrates, squeeze the leather between finger and thumb to see moisture oozing out from the leather. When the internal leather structure is relaxed and softens up; stretch the creases crosswise.
Allow the leather structure to partially dry prior to Fatliquoring it; using the same tissue paper with cling wrapping technique.
Hope this tissue paper technique makes sense.
Roger Koh
[email protected]