Results 1 to 4 of 4

Thread: Repair cut in Leather Seat

  1. #1
    Join Date
    Jan 2018
    Posts
    2

    Default Repair cut in Leather Seat

    We have a 2015 Honda Odyssey with leather seats. I noticed a cut in the drivers side seat (see picture). I would like to know if there are any suggestions for repairing this. Mostly I want to keep it from spreading or getting worse.

    Any of you suggestions would be appreciated!

    Thanks!

    Mike
    Attached Images Attached Images  

  2. #2
    Join Date
    Feb 2007
    Location
    Greater Vancouver, Canada.
    Posts
    5,102

    Default

    >>> I would like to know if there are any suggestions for repairing this. Mostly I want to keep it from spreading or getting worse.

    Such repair is done with Bond-3D and smooth with Bond-7A without the need for sanding. This Bond-3D > Bond-7A is without color. Optional color to add to Bond-3D is Micro-54.

    See:

    Bond-3D
    http://www.leatherdoctor.com/bond-3d/

    Bond-7A
    http://www.leatherdoctor.com/bond-7a/

    Micro-54 and shading example to custom match.
    http://www.leatherdoctor.com/micro-54/

    Tips
    From picture, it looks like there is blue jean dye transfer, and is recommended to be removed prior to repairing the cut with Kit-Ap7.di
    http://www.leatherdoctor.com/kit-ap7...n-removal-kit/

    Protector-B/B+ helps reduce friction rubs, thus reduces abrasion and cut with a buttery-feel.

    Look through the products mentioned and we can discuss further for the cut and care.

    Roger Koh
    Leather Care System Formulator
    Consultant / Practitioner / Instructor / Coaching
    web: www.leatherdoctor.com
    forum: www.leathercleaningrestorationforum.com
    email: [email protected]

  3. #3
    Join Date
    Jan 2018
    Posts
    2

    Default

    Quote Originally Posted by Roger Koh View Post
    >>> I would like to know if there are any suggestions for repairing this. Mostly I want to keep it from spreading or getting worse.

    Such repair is done with Bond-3D and smooth with Bond-7A without the need for sanding. This Bond-3D > Bond-7A is without color. Optional color to add to Bond-3D is Micro-54.
    Thank you very much for the answer!

    Is this a hard thing to do? Seems like (and I am a total amateur) that I should drip in some Bond-3D into the cut area and let it dry. Once that is done I am to use Bond-7A to smooth out what I did. If I want to do coloring I add some of the Micro-54 during the first step. Is this generally right? Should I buy the stuff from you and have an experienced person do this or do you think it is somewhat simple? Also, how would I get the color right? Seems like there are many choices.

    Let me know on the above, and thank you again!

  4. #4
    Join Date
    Feb 2007
    Location
    Greater Vancouver, Canada.
    Posts
    5,102

    Default

    >>> Is this a hard thing to do?

    If you have done any repairs to wood, or concrete the principle is quite the same, tools may vary. In this case you would need a ball tip tool to compress and smooth out the Bond-3D with Bond-7A.


    >>> Seems like (and I am a total amateur) that I should drip in some Bond-3D into the cut area and let it dry. Once that is done I am to use Bond-7A to smooth out what I did.

    You may use a bamboo skewers to control and direct the Bond-3D application into the cut and level it as well. To smooth it, any metal tool other then a pottery working ball tip tool may do the work of smoothening as well.


    >>> If I want to do coloring I add some of the Micro-54 during the first step. Is this generally right?


    Yes correct. A little coloring about 10 - 15% will do, not to compromise the strength and on the top application would be ideal.


    >>> Should I buy the stuff from you and have an experienced person do this or do you think it is somewhat simple?


    If you have done other repair works on other material, you just need to understand how these 2 products works by doing a test prior to the actual application. And decide from there if you need an experience person.


    >>> Also, how would I get the color right? Seems like there are many choices.


    The blue dye transfer stain from your blue jeans need to be 100% removed, otherwise you will not get the color matching correct.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •