Results 1 to 3 of 3

Thread: Restoration Hardware in Lancaster Cocoa, too Dry and Peeling Up!

  1. #1
    Join Date
    Jan 2022
    Posts
    48

    Default Restoration Hardware in Lancaster Cocoa, too Dry and Peeling Up!

    Hi,

    We have the restoration hardware in Lancaster cocoa.

    We have a small scratch in the leather, not sure if it’s from a kid or a dog, but it’s peeling up.

    Please see attached.

    What do I need to purchase to fix this?

    I also suspect my leather is a little thirsty too.

    I recently used a leather condition and it looked great for about a day and it’s drying out again.

    Thank you!!

    Carol Stoothoff

    Name:  Restoration Hardware Lancaster.jpeg
Views: 52
Size:  228.9 KB

  2. #2
    Join Date
    Feb 2007
    Location
    Greater Vancouver, Canada.
    Posts
    5,120

    Default

    >>> What do I need to purchase to fix this?

    To fix this peeling use leather Glue 3D found in this Leather Repair Kit A8.r

    Name:  Kit_A8.r__29375.jpg
Views: 52
Size:  98.3 KB
    https://leatherdoctor.com/leather-repair-kit-a8-r/

    >>> I also suspect my leather is a little thirsty too.

    When leather is dried off its original fatliquor (fat and oil) dry-rotting begins, and the leather grain weakens and easily exfoliates, like the shedding of dead skin cells. The exterior leather grain easily peels off with the weight of the leather finishes. Hydrating and fatliquoring with the original tannery system will rejuvenate the dried leather back to tensile strength with Hydrator 3.3 and Fatliquor 5.0 system.


    >>> I recently used a leather condition and it looked great for about a day and it’s drying out again.

    Restoration Hardware wax pull-up leathers use two conditioners, the primary conditioner is similar to ionic negative (-ve) charged leather Fatliquor 5.0, and the secondary condition is similar to Aniline Leather Wax Pull Up 8.6, which gives the characteristic wax pull-up effect.

    My recommendation for this simple repair with a matching product is as follows:

    Step 1 - Prep Cleaning with Prep 4.4
    Step 2 - Clean with Cleaner 3.8
    Step 3 - Rinse with Rinse 3.0
    Step 4 - Hydrate with Hydrator 3.3
    Step 5 - Fatliquor with Fatliquor 5.0
    Step 6 - Condition with Wax Pull-up 8.6
    Step 7 - Repair with Glue 3D
    Step 8 - Protect with Protector D

    Product Description and Instructions for the above-mentioned products are found in this Restoration Hardware Wax Pull-Up Leather Care Kit RW3
    Name:  Kit_Aw3__15833.jpg
Views: 52
Size:  116.1 KB
    https://leatherdoctor.com/restoratio...-care-kit-rw3/

    Name:  rogerIcon.jpg
Views: 51
Size:  4.8 KB
    Roger Koh
    Leather Care System Formulator
    Consultant / Practitioner / Instructor / Coach
    web: www.leatherdoctor.com
    forum: www.leathercleaningrestorationforum.com
    email: [email protected],
    email: [email protected]
    phone: 604 773 1878

  3. #3
    Join Date
    Feb 2007
    Location
    Greater Vancouver, Canada.
    Posts
    5,120

    Default

    >>> Thank you I received everything. One question before I do the repairs, I see the lamb skin is cream in color. Is there an additional stain I need to buy to match the brown of the leather?

    From the pictures, if the lambskin is required for a repair from the back, it would be after the 8-step procedure from the front, but very unlikely you would need to use this lambskin for this repair.

    From the picture, the color if required would either be a dark-brown or antique-brown from the Aniline 76 color range.
    https://leatherdoctor.com/aniline-coating-dye-76/

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •