Results 1 to 2 of 2

Thread: Leopard and Hyena Taxidermy Rug!

  1. #1
    Join Date
    Feb 2012
    Posts
    564

    Default Leopard and Hyena Taxidermy Rug!

    Dear,
    send to Brazil?
    I have leopard taxidermy rug and ONE hyena
    My leopard is 10 years old !!
    What better products to maintain the skin and avoid damages and tears?

    Hi Roger, I appreciate your attention and help.
    Here my country there is no taxidermy service
    I bought this leopard skin, the seller said to have 10 years brought South Africa
    I noticed a few skin tear and splices
    Do not know what to do to preserve ??
    Which glue to use to patch the skin?
    What is the best way to store it when it is not exposed?
    Can you help me ?

    Hi Roger
    How do I pay and Know the shipping value of the products I chose ?
    Do you accept Paypal ?
    thanks
    Sergio

    attached photos !!

    #1
    Name:  P_20161110_135013.jpg
Views: 332
Size:  924.4 KB


    #2
    Name:  P_20161110_135155.jpg
Views: 133
Size:  970.8 KB


    #3
    Name:  P_20161110_135304.jpg
Views: 163
Size:  1.11 MB


    #4
    Name:  P_20161110_135314.jpg
Views: 125
Size:  1.19 MB


    #5
    Name:  P_20161110_135326.jpg
Views: 134
Size:  785.0 KB


    #6
    Name:  P_20161110_135329.jpg
Views: 141
Size:  869.2 KB
    Last edited by Questions!; 11-11-2016 at 08:03 PM.

  2. #2
    Join Date
    Feb 2007
    Location
    Greater Vancouver, Canada.
    Posts
    4,547

    Default

    >>> Send to Brazil?

    Yes we shipped worldwide.
    To save on shipping opt for the reduce weight ‘Fill’ version.
    Email me for economical non-tracking version if you wish.


    >>> I have leopard taxidermy rug and ONE hyena
    My leopard is 10 years old!!
    What better products to maintain the skin and avoid damages and tears?


    To avoid skin damages that becomes stiff that leads to cracks and tears, the fat and oil moisture level has to be kept at about 15% measurable with a leather moisture meter or equivalent more economical skin moisture meter.

    Procedure steps are as follows:
    1st - Recommended that backing is to be removed
    2nd - Any soiling will need to be removed with CleanSuede-3.8 > RinseSuede-3.0
    3rd - Shrinkage need to be relaxed and stretch back with Hydrator-3.3 and skin rejuvenated with Fatliquor-5.0 and leave to slow dry.
    These 3 steps is how you would maintain the skin to avoid damages and tear with maybe a yearly reading of the fatliquor (fat and oil) content level and top it up as necessary to about the 15% level. Fatliquor is the lifeblood of the skin and keeping at that level will always keep the skin healthy.

    >>> Hi Roger, I appreciate your attention and help.
    Here my country there is no taxidermy service
    I bought this leopard skin, the seller said to have 10 years brought South Africa
    I noticed a few skin tear and splices
    Do not know what to do to preserve??
    Which glue to use to patch the skin?


    Skin tears are first rejuvenated up to 15% of fat and oil level prior to repairs; otherwise the repairs will soon crack for lack of strength.
    Repair is done with Bond-3D in conjunction with Patch-4S, details repairs is only done with invisible stitching and repairs with donor skin fibers taken from some thicker areas of the skin itself. This detail repair technique is similar to fiberglass repairs and looks more natural and homogenous.


    >>> What is the best way to store it when it is not exposed?


    Cover or stitch it up with breathable cotton bed sheet and keep in a dry location with humidity less then 55%.
    Need to inspect and take readings of the percentage of fat and oil contents.


    >>> How do I pay and Know the shipping value of the products I chose?

    Recommend Kit-H7+ - Zebra/Cow Hide Repair, Rejuvenating Care kit.
    Opt for the Kit Fill-1.1kg that will save you on shipping.
    Let me know if you prefer to have economical shipping without “Tracking”.
    http://www.leatherdoctor.com/kit-h7-...ting-care-kit/
    Name:  Kit-H7+.JPG
Views: 118
Size:  1.15 MB
    Leather Doctor Kit-H7+ zebra/cow hide repair, rejuvenating & care kit is an up-size version from the Kit-H7 with extra Hydrator-3.3 in 60ml concentrates that becomes 1.64quarts and Fatliquor-5.0 in 250ml concentrates that becomes 1.58quarts. When hide/skin tears it indicates that it is too dry and sufficient fatliquor is essential to revert the weakness. An up to 14% fatliquor (fat and oil) content when dry is highly recommended. Dry bonding repairs to the tear come last in the sequence after cleaning and rejuvenating. Bond-3D is a water-based medium soft polyurethane that bonds with the hide/skin fibers when dries and becomes part of it. Repairs will require close contact until it dries to bond. Reinforcement is either with donor suede fibers taken from surrounding areas or scrap pieces similar to fiberglass repairs techniques for better appearance or simply with Patch-4S for extra strength. Generally repair is done after the hide/skin in rejuvenated with Hydrator-3.3 > Fatliquor-5.0 system. Prior to rejuvenating the hide/skin to soften and strengthen it, dry soil is removed by using suede Brush-3 and Eraser-5 and vacuuming. General cleaning is done with Clean-3.8 follows with Rinse-3.0 on the hair/skin side. The hair side is then clean using CleanHair-5.5 follows with RinseHair-4.0. Protector-S+ impart a rub-resistant silky-feel to lubricates the hair from abrasion wear and a non-stick properties to shield the hair from sticky soiling with a classic leather scent to charm. Note that the mentioned product suffix number denotes its pH value in this leather-safe holistic care system for hair-on-hide.
    This kit comes with “Fill” shipping version, a reduced weight option to save on shipping, freezing and ease of handling, thus concentrate ratio in the 250ml bottles has to be cut and filled with distilled water prior to use.

    Instruction:

    Hide Side Cleaning and Rejuvenating prior to Repair:

    Sequence-1:
    A) Dry Soil Removal: Instruction: A1) Vacuum off foreign soiling with help of hideBrush-4. A2) Exfoliate to renew fresh nap with help of suede Eraser-5 follows with vacuum cleaner. Proceed to Sequence-2.

    Sequence-2:
    B) Wet Soil Removal: Instruction: B1) Apply Clean-3.8 and agitate with Brush-4/Eraser-5 and towel extract until it shows clean. B2) Spray Rinse-3.0 and towel extract to a squeaky clean. B3) Let natural drying and wick-up soiling is erased with Eraser-5 prior to hydrating. Proceed to Sequence-3.

    Sequence-3:
    C) Hydrating:Hydrating is to relax the hide/skin of stiffness from diminishing original fatliquor. Fatliquor diminishes as the hide/skin ages, accelerated when expose to direct heat and evaporate as VOC (volatile organic compound). Stiffness is common from a water damage situation too, when fatliquor leaches out, and when it becomes dry again the fibrils becomes stick together. Hydrating is to precondition the hide/skin for fatliquoring; it helps to relax and separate the stick together fibrils and opens up the inter-fibrillary spaces for effective colloidal water movement within the hide/skin structure. It facilitates to wick-up foreign contamination to be towel extracted when damp and erased when crispy dry. It plumps the hide/ skin to ease away the unnatural creases and wrinkles. It stabilizes the pH integrity of the hide/skin and charges the protein fiber ionic positive below its iso-electric point (pI) to hydrogen bond with the ionic negative fatliquor more effectively. It is recommended therefore to hydrate the hide/skin to an optimum level, with moistures oozing out when gently pressed between thumb and fingers. Prolong dwell time will maximize the effects with the help of covering with clear plastic to prevent evaporation. Instruction: C1) Spray Hydrator-3.3 with foam brush control to hydrate the entire thickness of the hide/skin; extract with dry absorbent white terry towel to inspect for an even appearance without blotchiness and it is ready for immediate fatliquor replenishing. C2) Severe dryness or stiffness will require a longer dwell time of up to 72hours with evaporation control, covering with a clear plastic sheet. When the hide/skin is plump, limp and lay flat extract until towel shows dry or about 25% reading from a moisture meter and immediately proceed to Sequence-4.

    Sequence-4:
    D) Fatliquoring: Fatliquor-5.0 an emulsion of fat and oil originally introduces to the hide/skin to impart its desirous suppleness continues to diminish through evaporation as it ages, accelerated when exposed to heat. It diminishes through leaching as well in a non leather-safe solution, manifest as stiffness when the skin becomes dry again. Replenishing is done with “fatliquor-in-a-bottle” as a spray-on instead of the original immersion method. Fatliquor, the lifeblood of leathers derived from fats, oils and water. Looks like fresh milk, when applies penetrates the leather and hydrogen bond with the hide/skin protein fiber. The fat plumps the skin with fullness, the oil lubricates the individual fibrils and the encasing water breaks free leaving the inter-fibrillary spaces void for natural transpiration. Effective fatliquoring will leave a non-greasy or non-oily surface when dry. Besides softening the skin with flatness, fatliquor enhances its rip tensile strength greatly. It relaxes coarse breaks, creases and wrinkles and prevents cracking. It helps to keep the skin at its optimum physical performance and prevent premature ageing.

    Hide/Skin Approximate Quantity or Percentage of Fatliquor:

    The quantities of fatliquor (fat and oil) contents retained in the hide/skin after an universal modern tannery fatliquoring process may varies up to 14% depending on the leather types and it usage. This percentage drops as the fat and oil content diminishes or leaches through ageing, water, heat or chemical overexposure.Leather rejuvenating or fatliquor replenishing is base on weight of the hide/skin in relation to the percentage of remaining fatliquor. A simple calculation of percentage of fatliquor topping up requirement would be as follows:If the weight of the hide/skin in question is 100gm and fatliquor (fat and oil) content meter reading is less than 1%.By applying 80gm of Fatliquor-5.0 to it will deliver an end result incremental of 13.3% fatliquor when dry as the 66.6% water contents evaporates.In the hide/skin rejuvenating Hydrator-3.3 > Fatliquor-5.0 > Hydrator-3.3 system, Hydrator-3.3 plays an important role by relaxing, opening up the inter-fibrillary spaces, facilitating and redistributing colloidal water movement, protonating and doing all the pre-conditioning work prior to fatliquoring including cleaning up any excess surface remnants to have a sticky-free surface. In practice with severe dryness the ratio for Hydrator-3.3 are 2 to 1 of Fatliquor-5.0.It works out to be approximately 160gm of Hydrator-3.3 plus 80gm of Fatliquor-5.0 to replenish a 100gm dry leather from less than 1% back to the original tannery up to 14% fatliquor content.

    Instruction:

    D1) Spray Fatliquor-5.0, with foam brush control for an even appearance.
    D2) Repeat application in between drying as the water contents evaporates until it’s saturated.
    D3) The fully saturated hide/skin is left for slow natural drying for extra softness.
    D4) Use Eraser-4 to remove wicks up residue and inspect for visual satisfaction.

    Sequence-5:
    E) Fiberglass Technique Repairs: Using donor hide/skin fiber repairs result in better appearance without a noticeable sub-patch. Fibers are scrape from surrounding thicker areas and used as cross laying across tears over the Bond-3D until satisfaction.

    Sequence-5:
    F) Sub-patch Repairs:
    F1) A half to one inch width on both sides of the tear is cut to shape and the center line is drawn as divider onto the sub-patch.
    F2) The lower tear side is first bond with the suede side of the patch press and let to dry before bonding the upper side of the tear.
    F3) Bond the other side and press to let it dry.

    Hair Side Cleaning and Conditioning:

    Sequence-6:
    G) Dry Soil Removal: Instruction: G1) Vacuum off foreign soiling with help of hideBrush-4.

    Sequence-7:
    H) Wet Soil Removal:Instruction: H1) Apply CleanHair-5.5, brush along the lay of hair in one direction and towel extract until it shows clean. H2) Spray RinseHair-4.0 and towel extract to a squeaky clean. H3) Let natural drying and dry towel wipe of wick-up soiling.

    Sequence-8:
    I) Non-Stick, Rub-Resistant Protection: Instruction: I1) Shake well, mist spray Protector-S+ evenly and brush-in with towel to pick up soiling at the same time. I2) When dry thereafter groom with hideBrush-4 or a slick comb for best appearance and it is ready for use.

    Let me know if you need further clarification?

    >>> Do you accept Paypal?
    Yes, we do!


    Roger Koh
    Leather Care System Formulator
    Consultant / Practitioner / Instructor
    web: www.leatherdoctor.com
    forum: www.leathercleaningrestorationforum.com
    email: [email protected]
    Last edited by Roger Koh; 11-11-2016 at 08:36 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •