Results 1 to 2 of 2

Thread: Bicast/Bycast: Peeling

  1. #1
    Join Date
    Feb 2012
    Posts
    564

    Default Bicast/Bycast: Peeling

    Hi,
    I’m looking for a repair kit to control the demise of our bycast/bicast sofa.
    Information on the web is very sketchy.
    Is there something you can offer?
    And are you ok to dispatch to London (UK).
    Regards…..Simon

    #1
    Name:  Simon 125.jpg
Views: 1339
Size:  4.13 MB


    #2
    Name:  Simon 126.jpg
Views: 306
Size:  3.36 MB

  2. #2
    Join Date
    Feb 2007
    Location
    Greater Vancouver, Canada.
    Posts
    4,655

    Default

    >>> Is there something you can offer?

    My recommendation is as follows:

    A. A complete removal of the “demise” laminating. A clean technique is to use a duct tape and peeling them off.
    B. The leather structure rejuvenated for suppleness with softness and strength with Hydrator-3.3 > fatliquor-5.0 > Hydrator-3.3 system.
    C. Filling joins or seams if any with Stucco-90 and sealing surface to a smooth touch with Adhesor-73.
    D. Opaque primary pigment color to block off base color with Bicast-32.
    E. Transparent secondary dyestuff to produce an aniline effect with Bicast-76.
    F. Gloss topcoat to seal dyestuff with BicastTop-76G.
    G. Non-stick, rub-resistant protection with a buttery-feel and impart a classic leather scent with Protector-B+.

    Products mentioned area are found in this Leather Doctor Kit-B8.cl

    Roger Koh
    [email protected]
    www.LeatherDoctor.com

    Name:  a207916145e2e29eea5f45_m.JPG
Views: 276
Size:  96.9 KB
    Bicast Leather Refinishing (Color) Kit B8.cl
    Leather Doctor® Kit B8.cl, Bicast/Bycast leather color refinishing kit is design for a holistic restoration approach to not only the finishes but also rejuvenating the leather crust for suppleness. Most of these repairs are for abrading damages into the leather split-suede crust or lamination failure.
    Most of these exposed areas may be contaminated with foreign soiling that includes conditioners, protectors, body oil, grease and sweat or alkaline overexposure from non leather-safe cleaners.
    A comprehensive repair for a long-term lasting solution will require a holistic approach to deal with both the exposed leather split-suede for structural integrity and surface finishes for aesthetic.
    A leather-safe restoration system begins with removing foreign contamination from the penetrated leather structure and from the surface with the proven Degreaser-2.2 follows with Rinse-3.0 to a healthy squeaky feel.
    A pH in-balance leather structure with alkalinity overexposure will manifest as tackiness, stickiness or in extreme cases sliminess. The ionic strength of such denaturing leather will need to be strengthen by protonating its ionic positive (+ve) with the help of Acidifier-2.0 until the leather is revert back to a healthy pH chemistry integrity.
    Penetrated soiling may be further moves with the help of Hydrator-3.3 by successive wicking process with optional reverse transfer technique and erase off with Eraser-4 for a satisfactorily inspection.
    Leather rejuvenating system for softness and strength is accomplishes with Hydrator-3.3 follows with Fatliquor-5.0.
    Surface uneven absorption is seals with Adhesor-73 to smooth out the suede and restore a skin to reduce the need for color over-coating thus increase its flexibility and stretchability from coating premature cracking.
    With Adhesor-73 as a base for adhesion promotion as well, it is ready for color coating with Bicast-32 an opaque pigment coloring to block out the unwanted based color. Bicast-76 is an aniline transparent color that gives the beauty of depth as the secondary coloring to simulate the appearance of aniline leather. And BicastTop-76 is a gloss topcoat that seals the coloring from bleeding, crocking and resistant to cleaning during the course of the leather useful life.
    Protector-B+ imparts a non-stick rub-resistant surface with a buttery feel, reduces noises that translate into less friction wear. As the leather surface is well lubricated it reduces compression when comes to heavy body contact thus reduces compressed creases, wrinkles thus prolong the useful life of the new finishes.
    Note the products suffix numbers denotes the pH value of the product.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •