Results 1 to 2 of 2

Thread: Bicast leather worn finishes

  1. #1
    Join Date
    Feb 2012
    Posts
    564

    Default Bicast leather worn finishes

    I have a black leather loveseat and chair purchased in 2008, and the finish is flaking off something terrible. Please see attached photos.
    The furniture is leather, but no doubt it’s a cheap split hide.
    I am wondering if I can purchase a kit that can be used to restore both these pieces.
    Any insight you have into what I need to use would be appreciated.

    #1
    Name:  P5060009.jpeg
Views: 663
Size:  200.1 KB


    #2
    Name:  P5060010.jpeg
Views: 927
Size:  235.2 KB


    #3
    Name:  P5060011.jpeg
Views: 613
Size:  274.1 KB


    #4
    Name:  P5060012.jpeg
Views: 566
Size:  242.7 KB

  2. #2
    Join Date
    Feb 2007
    Location
    Greater Vancouver, Canada.
    Posts
    5,097

    Default

    This Leather Doctor® Bicast Kit B8.cl is specially designed with products to restore such problem back to its useful life both to the leather structure integrity and aesthetic appearance.

    When you are ready I will give tips on how best to accomplish this project.

    Roger Koh
    Leather Care Consultant
    www.LeatherDoctor.com


    Product information from: http://www.leatherdoctor.com/servlet....cl/Categories


    Name:  B8.cl.JPG
Views: 532
Size:  1.67 MB
    Bicast Leather Refinishing (Color) Kit B8.cl

    Leather Doctor® Kit B8.cl, Bicast leather color refinishing kit is design for a holistic restoration approach to not only the finishes but also rejuvenating the leather crust for suppleness. Most of these repairs are for abrading damages into the leather split-suede crust.

    Most of these exposed areas may be contaminated with foreign soiling that includes conditioners, protectors, body oil, grease and sweat or alkaline overexposure from non leather-safe cleaners.

    A comprehensive repair for a long-term lasting solution will require a holistic approach to deal with both the exposed leather split-suede for structural integrity and surface finishes for aesthetic.

    A leather-safe restoration system begins with removing foreign contamination from the penetrated leather structure and from the surface with the proven Degreaser-2.2 follows with Rinse-3.0 to a healthy squeaky feel.

    A pH in-balance leather structure with alkalinity overexposure will manifest as tackiness, stickiness or in extreme cases sliminess. The ionic strength of such denaturing leather will need to be strengthen by protonating its ionic positive (+ve) with the help of Acidifier-2.0 until the leather is revert back to a healthy pH chemistry integrity.

    Penetrated soiling may be further moves with the help of Hydrator-3.3 by successive wicking process with optional reverse transfer technique and erase off with Eraser-4 for a satisfactorily inspection.

    Leather rejuvenating system for softness and strength is accomplishes with Hydrator-3.3 follows with Fatliquor-5.0.

    Surface uneven absorption is seals with Adhesor-73 to smooth out the suede and restore a skin to reduce the need for color over-coating thus increase its flexibility and stretchability from coating premature cracking.

    With Adhesor-73 as a base for adhesion promotion as well, it is ready for color coating with Bicast-32 an opaque pigment coloring to block out the unwanted based color. Bicast-76 is an aniline transparent color that gives the beauty of depth as the secondary coloring to simulate the appearance of aniline leather. And BicastTop-76 is a gloss topcoat that seals the coloring from bleeding, crocking and resistant to cleaning during the course of the leather useful life.

    Protector-B+ imparts a non-stick rub-resistant surface with a buttery feel, reduces noises that translate into less friction wear. As the leather surface is well lubricated it reduces compression when comes to heavy body contact thus reduces compressed creases, wrinkles thus prolong the useful life of the new finishes.

    Note the products suffix numbers denotes the pH value of the product.


    This kit comes with reduced weight option to save on shipping thus the 250ml concentrate ratio such as Rinse-3.0, Hydrator-3.3 and Fatliquor-5.0 has to be cut or filled up with distilled water prior to use. This is only a starter kit to help you moves in the right direction, optional adds-on and refills are available as individual bottles.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •