Results 1 to 3 of 3

Thread: Bicast Sticky Problem – How to solve it?

  1. #1
    Join Date
    Feb 2012

    Default Bicast Sticky Problem – How to solve it?

    How to solve this sticky problem?

    Name:  1397922284018.jpg
Views: 151
Size:  3.09 MB

    Name:  1397922337951.jpg
Views: 149
Size:  3.67 MB

  2. #2
    Join Date
    Feb 2007
    Greater Vancouver, Canada.


    Bicast / Bycast leather is split leather with a layer of polyurethane applied to the surface and then embossed. One common problem is the finish becomes sticky

    Kit B7 is the recommended kit to solve the sticky issue.

    From pictures #2
    It looks like fabric remnants becomes stick to it and when sitting on it and getting up will hear a familiar peeling sound. The topcoat has deteriorated and will need a refreshing new application to solve the sticky problem as follows:

    1st The surface soiling has to be removed and this is best done with Degreaser-2.2 working with the Eraser-4 to remove all sticking residue off with sponge extraction.
    2nd Surface is rinse to a squeaky clean with Acidifier-2.0.
    3rd When dry any roughness is sand accordingly.
    4th Crosslinker-25 is transfer into the BicastTop-76G and mixed well before application of your choice, best is with a varnishing soft brush to reduce streaks. Airbrushing will give professional result.
    5th Let dry in-between coats and sanding an option to smoothen the original roughness or surface undulating effect.
    6th When dry Protector-B+ application will impart a smooth buttery-feel non-stick surface for immediately use when dry.

    Roger Koh
    Leather Care Consultant

    Product Information:

    Name:  a20791e145446e500fc264_m.JPG
Views: 134
Size:  109.4 KB
    Leather Doctor Kit B7 – Bicast Leather Sticky Refinishing Kit
    Leather Doctorฎ Kit B7, bicast leather sticky refinishing kit is an innovative system developed to restore finishes sticky problem. The sticky problem is often described from owners as follows. The finish gone dull on the seating areas and any material comes in contact sticks to it. The finishes feels a bit rubbery but after 5mins of sitting clothing were stuck to it. The location that suffers tackiness also reveals roughness to the touch. When sitting down and getting up, there is the sound of tape pulling and you can actually see a pattern on the couch from the jeans. If these experiences sound familiar then this kit is the answer. Stripping the surface contamination is done with Degreaser-2.2 and the help of Eraser-4 for better traction to removed surface materials. Suspended soiling is towel extracted and rinse with Acidifier-2.0. 2000-grit sandpaper is used to smoothen rough surface. A 10% Crosslinker-25 is added to the BicastTop-76G for extra finish strength from stickiness. Protector-B+ imparts a non-stick buttery-feel against sticky soiling; a rub-resistant against friction wear and diffuses a leather scent that enhances leather sensuous and luxuriously. This kit comes with reduced weight option to save on shipping thus the 250ml concentrate ratio such as Acidifier-2.0 has to be cut or filled up with distilled water prior to use.

  3. #3
    Join Date
    Apr 2014


    Clean it with Lexol or oil-based cleaner.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts