Results 1 to 14 of 14

Thread: Coach - Restoring Coach vintage leather briefcase with fraying

  1. #1
    Join Date
    Feb 2013
    Posts
    10

    Default Coach - Restoring Coach vintage leather briefcase with fraying

    I just recently came into this Coach vintage briefcase and was wondering what steps I should take to restoring it. I attached some pictures but most importantly how would I repair the fraying on the bottom of the case? The leather is glove tanned leather if that is any help. Thanks!
    Attached Images Attached Images      
    Last edited by marvaments; 02-12-2013 at 06:32 AM.

  2. #2
    Join Date
    Feb 2007
    Location
    Greater Vancouver, Canada.
    Posts
    5,102

    Default

    repair the fraying on the bottom of the case?

    The fraying of the leather edges is repair by using this Bond-3D.
    The missing fiber is replaced by scraping from a piece of similar leather to use as donor.
    This is done by applying the bond to the surface and adding the leather fiber and putting them to shape with help of hair dryer to speed up drying.
    Color is added to the Bond-3D for an aesthetic repair.

    steps I should take to restoring it

    Most high-end black bags are aniline dyed just like most Chanel black bags.
    We can use the Aniline Leather Problem Solving Guide as reference.
    This bag can be restored accordingly under “Surface Abrasion”.
    When a total restoration is desired, the corner fray repair is done after fat and oil replenishing and before dying.

    Thus, the general structure of process should be in this order.

    1.] Degreaser-2.2
    2.] Rinse-3.0
    3.] Hydrator-3.3
    4.] Fatliquor-5.0
    5.] Bond-3D / Impregnator-26
    6.] Adhesor-73
    7.] Aniline-76
    8.] AnilineTop-76
    9.] Protector-B+

    We shall further discuss in details when you take up this project.

    Leather-Safe Aniline Problem Solving Guide

    Leather-Safe Problem Solving Guide (A) – Aniline Leathers

    Repair Products

    Leather Repairer (5):
    Leather Bond,

    Products mentioned

    Leather Doctor® Kit A6.dr


    Roger Koh
    [email protected]

  3. #3
    Join Date
    Feb 2013
    Posts
    10

    Default

    Roger, I am at the fatliquor step, about to attempt the Bond3d/Impregnator step. How should I proceed?
    Name:  IMG_6301.JPG
Views: 3123
Size:  4.85 MBName:  IMG_6302.JPG
Views: 3111
Size:  4.97 MB

  4. #4
    Join Date
    Feb 2007
    Location
    Greater Vancouver, Canada.
    Posts
    5,102

    Default

    All repair areas will need to clear of surface strays fatliquor.

    Spray Hydrator-3.3 horsehair brush and towel extract.

    A dry blower may speed up the drying on those areas as well.

    For weaken structure repairs, the Impregnator-26 is applied until the damaged areas is saturated prior to Bond-3D repairs.

    To prepare for the repairs, missing fiber need to be replaced and this is taken from the suede side of any similar leathers.

    Apply the bond to the worn areas and fill up with the suede fibers to fill it up working with a forceps and a leather tool or equivalent.

    These are simultaneously combine action to fill, compress and smoothen while the repair dries with the help of a heat blower.

    Color is added to the Bond-3D for deep repair during the few final touches for aesthetic, while shallow repairs are done with color mix.

    You can show pictures of the repairs if you are doing it right.

    Roger Koh
    [email protected]

  5. #5
    Join Date
    Feb 2013
    Posts
    10

    Default

    Quote Originally Posted by Roger Koh View Post
    All repair areas will need to clear of surface strays fatliquor.

    Spray Hydrator-3.3 horsehair brush and towel extract.

    A dry blower may speed up the drying on those areas as well.

    For weaken structure repairs, the Impregnator-26 is applied until the damaged areas is saturated prior to Bond-3D repairs.

    To prepare for the repairs, missing fiber need to be replaced and this is taken from the suede side of any similar leathers.

    Apply the bond to the worn areas and fill up with the suede fibers to fill it up working with a forceps and a leather tool or equivalent.

    These are simultaneously combine action to fill, compress and smoothen while the repair dries with the help of a heat blower.

    Color is added to the Bond-3D for deep repair during the few final touches for aesthetic, while shallow repairs are done with color mix.

    You can show pictures of the repairs if you are doing it right.

    Roger Koh
    [email protected]
    Still a little unsure on the leather transfer of "fibers". Do i cut out pieces of leather from another bag or do I take strands of another leather product?

  6. #6
    Join Date
    Feb 2013
    Posts
    10

    Default

    Do I put actual leather strands into the frayed area or do I cut out pieces of leather? Not 100% clear on this bonding part. Does it matter what color suede leather I choose as a donor?

  7. #7
    Join Date
    Feb 2007
    Location
    Greater Vancouver, Canada.
    Posts
    5,102

    Default

    The reverse side of leather is suede, take from any other leather product, you can unzipped from your leather cushion and scrape from the suede side.

    The suede fibers are scraped with a circular blade on a flat surface.

    Alternatively is to fold the suede facing out and scrape with a razor blade.

    A white and black range will not interfere with your “transparent” dye.

    Show pictures if you are doing it right before you continue.
    Last edited by Roger Koh; 03-02-2013 at 11:25 PM.

  8. #8
    Join Date
    Feb 2013
    Posts
    10

    Default

    Can I remove from a product that is pure leather suede? I have many old minnetoka suede moccasins that I could easily use.

  9. #9
    Join Date
    Feb 2007
    Location
    Greater Vancouver, Canada.
    Posts
    5,102

    Default

    Yes!

    Scrape them and use the fibers.

  10. #10
    Join Date
    Feb 2013
    Posts
    10

    Default

    I did two corners, not sure but I did the best I could. Is this the right idea? They are still dryingName:  IMG_6306.JPG
Views: 3012
Size:  5.68 MBName:  IMG_6308.JPG
Views: 2990
Size:  5.65 MB

  11. #11
    Join Date
    Feb 2007
    Location
    Greater Vancouver, Canada.
    Posts
    5,102

    Default

    Yes,

    Continue filling up with Bond-3D and filling up with fiber interlacing them for added strength

    Add coloring to the final few touches to hide away the color differences progressively.

  12. #12
    Join Date
    Feb 2013
    Posts
    10

    Default

    Ok, continued on towards the adhesor, aniline, aniline-top coat, and the protector B+ here are a couple shots of the final product. Corners turned out pretty good considering they were missing chunks of leather. I purchased some brass corners in case I feel like covering them up and to help accent/protect the briefcase. Name:  IMG_6327.jpg
Views: 2842
Size:  1.05 MBName:  IMG_6324.jpg
Views: 2762
Size:  1.37 MBName:  IMG_6323.jpg
Views: 2741
Size:  1.77 MBName:  IMG_6322.jpg
Views: 2742
Size:  2.72 MB

  13. #13
    Join Date
    Feb 2007
    Location
    Greater Vancouver, Canada.
    Posts
    5,102

    Default

    We would like to see some close shot of your repairs, are they smooth to the touch?

    How did you go about apply the dye and the topcoat, brush, pad or airbrush?

    Is this a practical solution for the DIY'er?

    Roger Koh
    [email protected]

  14. #14
    Join Date
    Feb 2013
    Posts
    10

    Default

    A little late in getting back to you. Some corners are better than others probably due to how much was missing on some of the corners. I didn't spend too much time on it since I figured I might add brass corners to the bag for protection. It was pretty easy once you go the hang of it. Key being to cut fibers as small as possible. Name:  IMG_6380.jpg
Views: 2565
Size:  1,013.8 KBName:  IMG_6381.jpg
Views: 2596
Size:  1.05 MBName:  IMG_6382.jpg
Views: 2555
Size:  1.28 MBName:  IMG_6383.jpg
Views: 2564
Size:  1.49 MB

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •