How to make leather chair look uniformed?
Step 1]
To remove the finish entirely by using Stripper-2.3.
Simply spray, erase with Leather Eraser-4 and extract with terry towel.
Step 2]
Rinse with Rinse-3.0 until towel shows clean.
Step 3]
Hydrate with Hydrator-3.3 into the thickness of the leather evenly soaking damp; extend the surface of the leather skin-tight without bubbles with tissue paper or toilet roll to trap any wick-up foreign contamination during the drying process; cling wrapped it to prevent premature evaporation; it’s recommended to leave the dwelling overnight. Next day, remove the plastic covering first and allow the natural drying through the air-tight tissue paper; when completely dry inspect the appearance; repeat where necessary.
Step 4]
Rejuvenate it with Fatliquor-5.0; saturate it sufficiently and evenly to bring back its natural color when natural dry.
Step 5]
An option of Topcoat, since they have such.
a natural naked look Topcoat Aniline-89N + Leather Scent-S (silky-feel);
or a choice of a waxy-matte look with Topcoat Aniline-59M + Leather Scent-W (waxy-feel);
or a choice of glossy look with Topcoat Aniline-79G + Leather Scent-B (buttery-feel).
Some products for this leather types:
Contents:
Degreaser-2.2 – 60ml
Prep-4.4 – 60ml
Cleaner-3.8 – 250ml
Rinse-3.0 – 250ml
Hydrator-3.3 – 250ml
Fatliquor-5.0 – 250ml
Leather Scent-D – 120ml
Leather (horsehair) Brush-1 – 1pc
3” Poly-Brush® - 1pc
Washable Rags – 5pcs
Leather Doctor® Stripper-2.3 for Pigmented and Aniline leather types, including vachetta, nubuck and suede.
This is a pH 2.3 hydrocarbon formulation leather finish stripper developed to strip leather and suede of existing finish prior to refinishing.
Product packing sizes are available in 250ml and in Quart.
Instruction:
1] Spray, erase with Leather Eraser-4 and extract with terry towel.
2] Rinse with Rinse-3.0 until towel shows clean.
Roger Koh
[email protected]