-
Aniline Wax Pull-up - How to restore faded Aniline Wax Pull-Up leather Loveseat & Ottoman?
-
To have relevant answers, post questions to the pictures!
-
I just need the necessary steps for restoring. The major concerns is the fading & the repairs in pictures 9 & 10.
-
Reverse one cushion and show us the contrast between the unused and the used.
Picture #9 shows physical damages, it is correct?
Is Picture #10 another physical damage too?
Is restoration including color refinishing?
-
-
The unused leather shows that this is an Aniline Wax Pull-Up leather and Wax Effect-8.6 is recommended to be used as a secondary rejuvenator to achieve the original result, besides the dyes, adhesion and topcoat.
Leather Bond-3D is recommended to be used for the repair; however any repairs on aniline will result in a darker healing mark that is unavoidable even from the tannery.
The recommended structure of restoration process is as follows:
1] Restoration Cleaning:
Use Prep-4.4 > Cleaner-3.8 > Rinse-3.0
2] Hydrating:
Use Hydrator-3.3 for an overnight soak with control evaporation under wrapped.
3] Dry soiling Removal:
Use leather Eraser-4.
4] Stain Dyeing:
Airbrush to even out the difference in color intensity – inspect in between drying until satisfaction.
5] Leather Primary Rejuvenation:
Use Hydrator-3.3 > Fatliquor-5.0.
6] Inspection:
Check all Fatliquor-5.0 strays with Hydrator-3.3 and drive the strays in until hydrator is clear (milky shows the presence of fatliquor on the surface)
7] Pull-up Fashion Secondary Rejuvenation:
Use Wax Effect-8.6 (after a minimum of 4 hours white wax crystal will form on the surface brush them away).
8] Repairs:
Use Leather Bond-3D
9] Adhesion Coating:
Use Adhesor-73
10] Inspection for dyeing appearance:
11] Dye Coating:
This is the optional coating of dyestuff with the additional 10%, 20% to 30% of Adhesor-73 to even out the evenness of dyeing.
12] Top Coating:
Use Aniline Topcoat-79G (gloss).
Shoot your question!
Roger Koh
[email protected]
-
Which leather scent should be used?
-
Leather Scent-D with a draggy-feel to match the wax effect, it can also used to eliminates those scuff and minor surface scratches during the routine maintenance by your customer - introduce it to them to make their upkeep simple.
Tips:
Have to warn your customer not to use Lexol Conditioners as you can see the structural distortion seen on the other thread...
http://www.leathercleaningrestoratio...ead.php?t=7486
Here's the Problem Solving Guide-AW9 for this Aniline Wax Pull-up Leathers...
And this is the Aniline Wax Pull-up Care Kit...
Roger Koh
[email protected]
