Printable View
Aloha,
We came across this leather loveseat and from the pictures you can see it needs some TLC. I had read a previous post "used couch purchase has strange melted looking damage around head area" from bbb so we decided to give repair a chance.
We just wanted to make sure we were going about this correctly. What do you suggest?
Mahalo.
Attachment 3879Attachment 3880Attachment 3881Attachment 3882Attachment 3883
This “melted looking damage around head area” are typically associated with “Bicast” leathers. See general description of bicast leathers.
Bicast Leather
Bicast / Bycast leather is split leather with a layer of polyurethane applied to the surface and then embossed. Bicast was originally made for the shoe industry and recently adopted for use by the furniture industry. The result is a slightly stiffer product that is cheaper than top grain leather but has a much more consistent texture and is easier to clean and maintain. The use of terms like "leather", "genuine leather" or "100% leather" in relation to this bicast treatment is considered a misrepresentation and therefore not permitted in some countries. Furniture made with bicast exhibits none of the characteristics associated with aniline leather. With constant use, the polyurethane layer may crack and split free of its backing. Other common problem is the finish becomes sticky
>>> What do you suggest?
This Kit-B7 will solve your sticky problem; you may see a recent example here:
http://www.leathercleaningrestoratio...her-and-sticky!
Attachment 3884
Leather Doctor® Kit-B7, bicast leather sticky topcoat refinishing kit is an innovative system developed for bicast leather to restore finishes sticky problem. The sticky problem is often described from owners as follows. The finish gone dull on the seating areas and any material comes in contact sticks to it. The finishes feels a bit rubbery but after 5mins of sitting clothing were stuck to it. The location that suffers tackiness also reveals roughness to the touch. When sitting down and getting up, there is the sound of tape pulling and you can actually see a pattern on the couch from the jeans. If these experiences sound familiar then this kit is the answer. Stripping the surface contamination is done with Degreaser-2.2 and the help of Eraser-4 for better traction to removed surface materials. Suspended soiling is towel extracted and rinse with Acidifier-2.0. 2000-grit sandpaper is used to smoothen rough surface. A 10% Crosslinker-25 is added to the BicastTop-76G for extra finish strength from stickiness. Protector-B+ imparts a non-stick buttery-feel against sticky soiling; a rub-resistant against friction wear and diffuses a leather scent that enhances leather sensuous and luxuriously.
Instruction
Wet Preparation:
1. Protect floor with plastic covering from overspray and drips prior to stripping accumulated soiling.
2. Shake the Degreaser-2.2 to gel prior to use.
3. Transfer to the Eraser-4 on the sponge side for normal cleaning and the crepe side for an extra scrub.
4. Apply with agitation onto the leather finish to remove surface soiling.
5. Suspended soiling is extracted with a lint-free towel or cleaning sponge until towel shows clean.
6. Spray Acidifier-2.0, agitate with Eraser-4 and extract until towel shows clean again.
7. When dry, sand surface roughness and ensure free of foreign material with 2000-grit sandpaper.
8. Speed dry with hair dryer, free of residue and is ready for topcoat application.
Refinishing:
1. Crosslinker-25 10% is added into the BicastTop-76G to control existing stickiness. Empty the entire 7gm of Crosslinker-25 into the 70ml half filled bottle of BicastTop-76G and stir or swill it well. Once the topcoat is cross-linked, it is best to used within 8 hours, otherwise it will be cured hard and be useless.
2. Apply by foam brush lightly to avoid streaks or use soft varnishing brushes for streaks free result or airbrushing for professional result.
3. Steaks are corrected by fine 2000-grit sanding when dry.
4. Use a hair dryer for speed drying in-between coats to satisfaction.
5. Let it overnight cure before non-stick protection.
Non-Stick Protection:
1. Protector-B+ is applied evenly with either foam brush or paper towel and is ready for use when dry.
2. For routine application, a paper towel is recommended to simultaneously extract soiling.
Kit Content and Product Description:
Leather Doctor® Degreaser-2.2 (120ml)
This is a waterbased pH 2.2 high viscosity formulated leather degreaser. It is for degreasing leather of penetrated oil, grease and sweat stains from skin and hair contact. Emulsified contamination is rinse with Rinse-3.0 to a squeaky-feel.
Leather Doctor® Acidifier-2.0 (250ml)
This is a waterbased pH 2.0 leather acidifier to rinse and neutralize tackiness from alkaline contamination.
Leather Doctor® BicastTop-76G (70ml)
BicastTop-76 is a heavy-duty gloss topcoat design for bicast leathers. This is a waterbased fine particular size urethane-resin emulsion to protect bicast finishes with excellent toughness and flexibility. To rectify sticky or tacky finishes problem, an up to 10% of Crosslinker-25 is added prior to application.
Leather Doctor® Crosslinker-25 (7ml)
This is an auxiliary for refinishing topcoats to improve adhesion properties and increase top coat film strength. This is a high solid, polyaziridine crosslinker, without the VOC (volatile organic compound). It is super-concentrated and when incorporating a 10% to the topcoat it will significantly boost adhesion. By creating a tougher film that also ties up some of the hydrophilic elements.
Leather Doctor® Protector-B+ (120ml)
This is a leather scented, non-film forming, non-stick, rub-resistant protector that impart a natural buttery-feel. Its non-stick breathable barrier is essentially to shield the detrimental effects of sticky soiling. Its natural buttery-feel protection increases the leather resistance to wet and dry rubs, thus reduce stretch, scuff and abrasion. It reduces friction squeaks that wear the finishes when one slides in and out of leather seats.
Leather Brush-1 (1pc)
This horsehair detailing brush is designed ergonomically to be an extension of our hand with a sturdy grooved grip. It is designed to produce effective result easily and efficiently. It is recommended for all smooth leather for a soft and scratch-free cleaning. Its length is 7 inches with a three-row bristle 1½ inches cleaning head.
Paper Towel Rags (5 pc)
This rag works like cloth, lint free, highly absorbent and washable. General application is for extracting suspended soiling or for spreading hydrator, fatliquor or protector. It is used for both dye and topcoat padding for smooth leathers.
3 inch Poly-Brush (1 pc)
This is a dense foam that resists tearing and shredding and carries more material. It has a solid wood handle that allows greater control for quality results. It is used for controlling and spreading fatliquor for a more even distribution.
2000-grit wet and dry Sandpaper (1 pc)
This sandpaper is selected specially for its ability to smoothen rough finish. Sanding is aim at the finish for better anchorage during refinishing. It is for smoothen finishes in between coating when necessary.
Leather Eraser-4 (1 pc)
This is a 2½ x 2¼ x ¾ inch foam rubber sponge block with a crepe side for effective dry/wet traction soil removal.
Mahalo Roger,
One other question; will the amount in kit B7 suffice for the entire loveseat? (front and arms mostly, back and sides seem ok) Can extra kit components be purchased if not? If so can you give an estimate so I will have enough to complete the job? Again mahalo.
Coverage of product is based on area, averaging 1ml per square foot however variation of coverage depends on severity of problems and surface texture. Extra components can be purchased individually as add-on. More economically is to upsize it, Degreaser-2.2 120ml to 250ml, Acidifier-2.0 add-on another 250ml, BicastTop-76G 60ml to 250ml, Crosslinker-25 to 30ml, Protector-B+ 120ml to 250ml and a spare bottle for mixing the topcoat and the crosslinker. Only paying an extra of $59/- will cover more than 3 times your sticky problem. Note that the fill-up version saves on shipping rate based on weight; you will need just to fill it up with distilled water prior to application. Email me if you prefer this option, otherwise you can order direct accordingly - http://www.leatherdoctor.com/servlet...-Kit-B7/Detail
Roger Koh
Leather Care Consultant
[email protected]
www.LeatherDoctor.com