Repaired RH chesterfield

>>> wish the leather matched better in texture and look aside from the base color. Is it possible to wax these new sections of leather on the sofas to better blend into the rest? RH calls ours "vintage cigar" if that helps at all...

Will need you to show some pictures?

>>> As well, what are the best maintenance procedures for the waxed leather?

Here is a general description of “Aniline Wax Pull-up” leathers…

Wax pull-up leathers derive its color from dyestuff and effect wax that gives the leather a lively distressed look. When this leather is pulled, stretched or scratched, the waxes dissipate characteristically and become lighter in those areas. Sunlight and stretching through high wear areas are two main indications that the infused wax needs replenishing. As is, effect wax behaves just like the primary fatliquor they do diminish through ageing and will need periodic replenishing. Besides contributing to the color intensity, it improves in water shedding effect. Effect wax when applied to the leather penetrates while some transforms into fine cloudy crystal and remains on the surface. The dried surface white powdery deposits are then heat activated and when they melt, they coat the surface with a glossy sheen. In a restorative care cycle a urethane gloss topcoats is applied to restore its original appearance.

You may use this Aniline Wax Pull-up Leather Problem Solving Matrix for the maintenance procedure…
Attachment 6549

Here is the recommended Kit-Aw3 for general care…

Attachment 6550
Leather Doctor® Kit-Aw3, aniline wax pull-up leather care kit is an innovative leather-safe (pH 3 - 5) system designed for keeping leathers at their highest level of appearance, maintaining its pH chemistry integrity, enhancing their suppleness and prevents premature ageing. Leathers that faced the sun, closed to fireplace and heaters dries out the fat and oil that keeps it supple sooner than the non-heat exposed areas. The diminishing of the fat and oil through evaporation results in the leather fibers being stick closer together that results in stiffness and when flexed during used will lead to cracks. Periodic use of Hydrator-3.3 to plumps the stick together fibers prior to fat and oil replenishing with Fatliquor-5.0 will keep the leather supple and strong. Thus, reduce the premature ageing of the leather against stiffness and cracking. WaxEffect-8.6 rejuvenates the structural wax pull-up effect and coagulates a cloudy waxy coating on the surface to be heat activated into the characteristic glossy sheen during periodic care. The surface wear of the leather is greatly reduced in preventive care with a rub-resistant Protector-D that enhances a non-stick draggy-feel to shield against sticky soiling, besides healing and concealing lightening scuff and abrasion marks. Periodic cleaning and rinsing with Clean-3.8 follows by Rinse-3.0 to the bare body contact areas like headrest and armrest helps reduce greasy soiling build-up. Restorative cleaning and occasional dye stains removal from new blue jeans is accomplished with Prep-4.4. Note that the mentioned product suffix number denotes its pH value in this leather-safe holistic care system for aniline wax pull-up leathers.

Cycle of Care Instruction:

Preventive Care:
A non-stick, rub-resistant protection is recommended to be in place before putting the leather to daily use. Protector-D imparts a soft natural draggy-feel that enhances the leather luxuriously to the sense of touch. The non-stick surface shields the leather from sticky soiling thus prolonging the high level of appearance. Rub-resistant abilities reduce wear to the topcoat and also have properties that seal and conceal scuffing. Optional leather-scented version Protector-D+ diffuses a classic leather scent that boost the sensuous leather more appealing to the leather lover. This protection care commences before usage and at the end of each level of routine, periodic or restorative cleaning cycle.

Instruction:

1. Apply Protector-D on dust free surface after shaking well, towel spread and is ready for use when dry.

Routine Care:
Routine care includes procedures such as general dust cleaning, attending to spots and stains as required especially the neutralizing of sweat or perspiration stains from shifting alkaline. Thus prevents leather from tackiness. A routine non-stick rub resistant protection after neutralizing rinse helps keep leather in a more attractive and healthy state while preventing premature wears.

Instruction:

1. Spray Rinse-3.0 on a dust free surface, horsehair Brush-1 agitates and towel extract until it shows clean.
2. When dry, apply Protector-D after shaking well, towel spread and is ready for use when dry.

Periodic Care:
Periodic care is recommend before soiling causes damages to the finishing. This keeps leather consistently clean and healthy at all times. Body contact surfaces would require more frequent attention than non-body contact surfaces. While the headrest and armrest gets the most of body oil and sweat contacts.

Instruction:

1st phase – Cleaning:
1. Spray Clean-3.8 and agitate with horsehair Brush-1; ensuring a uniform saturation application over the entire surfaces a section at a time.
2. Towel extract until it shows clean.
3. Remaining residues are spray rinse with Rinse-3.0 and towel extract to a squeaky-clean.
4. Let dry and inspect for satisfaction, otherwise repeat cleaning process as necessary or proceed to hydrating.

2nd phase – Hydrating:
Hydrating is essential to relax unnatural creases and wrinkles. Leather shrunk and becomes stiff when the structural fibers become stick together as the fatliquor diminishes through ageing or under heat over-exposure or under influence of alkaline solution. They are stretched crosswise when the leather is plump. Plumping the stiff leathers may take up to 72hrs under evaporation control. Besides, its pH value of 3.3 helps charge the protein fiber ionic positive (+ve) to increase the hydrogen bonding attraction between the ionic negative (-ve) fatliquor at the molecular level.
1. Spray Hydrator-3.3 control and spread with foam brush to hydrate deep into the leather thickness.
2. Let dwell 10 to 30 minutes to break surface tension, depending on severity of dryness, with optional plastic cling wrapping to control evaporation for a longer dwell time up to 72hrs, to plumps the leather more effectively for ease of cross stretching unnatural creases and wrinkles.

3rd phase – Fatliquoring:
Fatliquor evaporates as VOC (volatile organic compound) when temperature rises especially from exposed micro crazing and stitching rows. Periodic fatliquor (ionic negative (-ve) charged emulsion of natural fat and oil) replenishing maintains the leather’s structure integrity and pliability thus increase leather tensile strength with softness and added intensifying color richness.
1. Spray Fatliquor-5.0 after shaking in like manner as Hydrator-3.3 and let dry naturally.
2. Repeat application while still damp about 25% moisture content remaining in between drying until saturated again.
3. Leave the leather for slow natural drying for extra softness.
4. Wipe surface strays with Hydrator-3.3 to free of sticky residue.

4th phase – Preventive Care:
1. When dry, apply Protector-D after shaking well, towel spread and is ready for use when dry.

Restorative Care:
Restorative care is the ultimate corrective or salvage care system that removes accumulated soiling including aged conditioners to its original OEM finishes. Accumulated soiling that fills creases is often mistaken for cracks. Restorative cleaning is performed by Prep-4.4. It works by chemical reaction to emulsify soiling through its penetrating, lubricating and suspending power. Its thick as honey viscosity facilitates coating the surface for effective dwell time. Horsehair detailing Brush-1 is recommended to worked into heavily soiled areas sufficiently to avoid excessive agitation that might damage already weaken finishes especially on heavily used areas. For extreme cases, the Prep-4.4 can stay continuous for up to 72 hours to do its work safely including ‘reverse transferring’ of unwanted dye stains from new blue jeans, newsprints and ballpoint ink.

Instruction:

1st phase - Restorative Cleaning:
1. Apply Prep-4.4 and agitate with horsehair Brush-1, ensuring a uniform application over the entire surfaces a section at a time.
2. Allow a dwell time of 10 to 30 minutes or before it dries prior to towel extraction until it shows clean.
3. Sticky residue is removed by Clean-3.8 with gentle brush agitation and towel extraction until it shows clean.
4. Remaining residues are spray rinse with Rinse-3.0 and towel extract to a squeaky-clean.
5. Let dry and inspect for satisfaction, otherwise repeat Prep-4.4 with Towel-T5 for a ‘reverse transfer for dyestuff stains, application with a longer dwell time as necessary and check for reverse transfer satisfaction. 6. Proceed with Hydrator-3.3 after Rinse-3.0 and satisfied inspection.

2nd phase – Hydrating:
Hydrating is essential to relax unnatural creases and wrinkles. Leather shrunk and becomes stiff when the structural fibers become stick together as the fatliquor diminishes through ageing or under heat over-exposure or under influence of alkaline solution. They are stretched crosswise when the leather is plump. Plumping the stiff leathers may take up to 72hrs under evaporation control. Besides, its pH value of 3.3 helps charge the protein fiber ionic positive (+ve) to increase the hydrogen bonding attraction between the ionic negative (-ve) fatliquor at the molecular level.
1. Spray Hydrator-3.3 control and spread with foam brush to hydrate deep into the leather thickness.
2. Let dwell 10 to 30 minutes to break surface tension, depending on severity of dryness, with optional plastic cling wrapping to control evaporation for a longer dwell time up to 72hrs, to plumps the leather more effectively for ease of cross stretching unnatural creases and wrinkles.

3rd phase – Fatliquoring:
Fatliquor evaporates as VOC (volatile organic compound) when temperature rises especially from exposed micro crazing and stitching rows. Periodic fatliquor (ionic negative (-ve) charged emulsion of natural fat and oil) replenishing maintains the leather’s structure integrity and pliability thus increase leather tensile strength with softness and added intensifying color richness.
1. Spray Fatliquor-5.0 after shaking in like manner as Hydrator-3.3 and let dry naturally.
2. Repeat application while still damp about 25% moisture content remaining in between drying until saturated again.
3. Leave the leather for slow natural drying for extra softness.
4. Wipe surface strays with Hydrator-3.3 to free of sticky residue.