Printable View
Roger, We need to repair the ottoman, it has some cat scratch and a shallow slice which looks like it was scored with a razor blade. There are also a few paint spots or ink spots on it too.
I want to order 1 quart of dye because she has matching furniture. I'm quite sure we want Micro-54, let me know after you get the sample.
Attachment 8793
11-16 A
Attachment 8794
11-16B Small shallow slice, not all the way through
Attachment 8795
11-16C Cat Scratch
>>> I'm quite sure we want Micro-54, let me know after you get the sample.
Micro-54 is the closest from pictures, and most likely a satin topcoat MicroTop-54S would match as well, in this system: Adhesor-73 > Micro-54 > MicroTop-54S > Protector-B/B+.
>>> picture - 11-16B Small shallow slice, not all the way through
If possible, insert a flat plate below the repair, Bond with Bond-3D and weight it down to flatten down the perturbed edges to avoid any sanding when cured.
>>> picture - 11-16C Cat Scratch
Apply Bond-3D under the flap and press to flatten it.
Online-Life-Coaching is now available at half hour session for a fee.
Attachment 8804
Roger Koh
Leather, Skin & Hair Care System Formulator
Consultant / Practitioner / Instructor / Online-Life-Coaching
online store: www.leatherdoctor.com
forum: www.leathercleaningrestorationforum.com
email: [email protected]
What can a use between the leather repair and the weight that won't stick to the leather?
>>> What can a use between the leather repair and the weight that won't stick to the leather?
I would use a smooth waxed paper from the reverse of self adhesion shipping labels.
As for inserting a metal piece, this is only practical if there is opening especially for typical seat cushion.
Attachment 8941
01-07 A Color is way off, what should I use to bring it back
>>> 01-07 A Color is way off, what should I use to bring it back
Use Thickener-48 up to 10% by weight.
1- Make sure that the received custom color is mix very well as the heavier color had already sank to the bottom.
2- Transfer to the spraying container and mix up to 10% of Thickener-48.
3- Stir them up again at each interval to reduce color separation.
4- Fast drying in between coats also reduce color separation.
Let me know if further tips is necessary.
Feed backs from your projects helps improves tips and recommendation.
If you have time, go back and provides some feedback to your other threads to conclude that tips and recommendations were satisfactorily.