- Aniline leather chair

>>> hey roger just wondering what you suggest with removing this green stain.

Picture 2B close up shows the color finishing is rub-off and the chrome-tanned leather crust is revealed.

However, the remaining dyestuff transferred stain is removed using - CleanDye-7.9 > Acidifier-2.0 system . . .

Attachment 9621
http://www.leatherdoctor.com/cleandye-7-9/

CleanDye-7.9 is a water-based formulation for dye stain removal. Especially effective on new blue jeans dye transfer onto leather and suede surface. This is a pH 7.9 high viscosity dyestuff remover that works by dwell-time allowing its superior penetrating, lubricating and suspending power to do its work thus reduce unnecessary physical rubbing that may do more finishing damages to non-absorbent leathers. Absorbent leather and suede is to use a quick dry agitation with lightly saturated cotton bud, pad or cloth to avoid unnecessary product absorption by the leather and suede. As dyestuff is reverse transfer, turn or change to new application and repeat until the stain is satisfactorily removed. The leather pH value of 3 to 5 need to be balanced back from pH 7.9 exposure, especially the absorbent leather and suede and sticky residue removed with Acidifier-2.0 as a holistic leather and suede safe dye stain removal process. Prior damaged topcoat that affects the luster level is rectified according with the appropriate topcoat like MicroTop-54G, AnilineTop-76G, etc. Rub-resistant preventive care with Protector-B, D, W or S is the final application to satisfied the tactile feel and an option with the classical scent of leather.

Absorbent Leather and Suede Instruction:
1- Transfer CleanDye-7.9 to lightly damp cotton bud, pad or towel.
2- Lightly agitate the dye stain and observe the cotton bud.
3- If dye is transfer to the cotton bud, repeat the entire stain area accordingly to satisfaction.
4- pH balance and rinse sticky residue with Acidifier-2.0
5- AnilineTop-76 in gloss or satin is an option for refinishing.
6- Protector-B or B+ (classic leather scent) helps reduce friction rubs dye transfer.

Non-Absorbent Leather Instruction:
1- Place Towel-5 over the stain and apply CleanDye-7.9 free of air bubbles in between.
2- Allow the suspended stain to be transfer to the paper towel.
3- Inspect for satisfaction or repeat above 1 and 2 until satisfaction.
4- pH balance and rinse sticky residue with Acidifier-2.0.
5- MicroTop-54 in gloss, satin or matte is an option for refinishing.
6- Protector-B or B+ (classic leather scent) helps reduce friction rubs dye transfer.

Attachment 9622
Roger Koh
Leather, Skin, Eye, Hair & Acne Care System Formulator
Consultant / Practitioner / Instructor / Coach
web: www.leatherdoctor.com
forum: www.leathercleaningrestorationforum.com
email: [email protected]