Bicast - Leather couch is staining my shirts.

I have a leather couch, indeterminate age, which was given me by a neighbor when they moved out. The springs are in decent shape, but the leather is getting a bit tired.

http://i1193.photobucket.com/albums/...S/DSCN2229.jpg

I've had it about a year now. I've noticed when I sit on it for a while, I become stuck to it. Also I've been getting stains on my shirts, that I eventually figured out were coming from the couch. Last week I fell asleep on it and woke up to find myself glued to the surface; had to roll myself off onto the floor. Then the back of my shirt was almost completely black.

There are also a few small tears, and some places where the brown is worn off completely leaving bare leather.

http://i1193.photobucket.com/albums/...couch-back.jpg
http://i1193.photobucket.com/albums/...ch-cushion.jpg

Any suggestions on repairing these, and any suggestion of how to get the brown out of my shirt?

Looks like I am looking at “Bicast” leather type.

I've noticed when I sit on it for a while, I become stuck to it

The finishes especially the gloss urethane topcoating has deterioated (lost of shine), leaving the colorcoat more vulnerable to sweat damages (“brown is worn off”).


Recommendation for a holistic refinishing in this sequence of processes:

A] Preparation Cleaning:

1] Stickiness may be due to sweat contamination and is to be pH neutralized with Acidifier-2.0 (pH 2.0) until a squeaky feel.

2] Preparation cleaning with Prep-7.7 (pH 7.7) with help of Leather Eraser-4 and horsehair Brush-1 for detailing stitching and tight corners with towel extraction.

3] Sticky residue is removed with Cleaner-3.8 (pH 3.8) and towel extraction.

4] Remaining suds is removed with Rinse-3.0 to a squeaky feel.

5] Fine wet sanding is done with 1000 – 2000 sanding grit to smoothen any roughness follows with Rinse-3.0 towel extraction.


B] Repairs:

1] Stucco-90 + Leather Bond-3D + Bicast Pigment-32 for repairing small tears accordingly.


C] Refinishing:

1] Adhesor-73 is used to ensure good bonding between the existing and new finishing as the sealer coat.

2] Opaque Bicast Pigment-32 is to ensure even appearance as it block off existing uneven finishes and may take on a monotone appearance.

3] Transparent Bicast Dye-76 is use to create the beauty of depth.

4] Bicast Topcoat-66G is use to bring back the desired gloss luster typical of bicast leather.


Here are some of the products mentioned

http://i300.photobucket.com/albums/n...rkoh/105-1.jpg
Leather Doctor® Kit B6.tc - Bicast Leather – Tackiness Refinishing Kit (Tan Color)

The complete product description and instruction can be found in this link:
http://www.leathercleaningrestoratio...nd-Instruction


“any suggestion of how to get the brown out of my shirt?”

Acetone would be the best choice, but I think will also dissolve acetate fabric (need to do a test if it is safe to your fabric).


Let me know what you think?


Roger Koh
[email protected]