Attachment 4807#1Attachment 4806#2Attachment 4808#3Attachment 4809#4Attachment 4810#5
Iordered antique 27 please let me know if you think it should be something other,
Printable View
Attachment 4807#1Attachment 4806#2Attachment 4808#3Attachment 4809#4Attachment 4810#5
Iordered antique 27 please let me know if you think it should be something other,
It always depends on the outcome of the stain remover.
And if no objection to a higher color saturation, then Aniline-76 would be a better choice - refinishing back to the original "transparent" aniline.
>>> Severe oils on chairs
Tips:
Razor-60 off existing topcoat during the Degreaser-2.2 > Acidifier-2.0 > Hydrator-3.3 process makes wicking the contamination easier.
Predetermine the amount of Fatliquor-5.0 necessary to be replenished before allowing the leather to dry prevent potential leather cracking.
Confused again, We asked if (Iordered antique 27 please let me know if you think it should be something other). and you replied (And if no objection to a higher color saturation, then Aniline-76 would be a better choice - refinishing back to the original "transparent" aniline.). And you made up Antique 27- I thought we would discuss this before proceeding with mixing dye? Will Antique-27 be ok?
>>> Will Antique-27 be ok?
If there is no objection to a higher color saturation to camouflage the darkest remaining of a stain or after dry preparation inspection – Aniline-76 would be a better choice.
Since the sample is aniline, restoring it back to aniline will retain the value of this chair and ottoman.
We can switch your ‘Langan’ order to Aniline-76 and edit the invoice accordingly.
Attachment 5090
5-18A Back is too dark, client may be ok with being darker but what about ordering micro-54 and giving it a light coat to lighten up and even out the color? I'm sending pictures of other areas too, the color is very uneven, there are many darker spots that just don't look natural.
Attachment 5091
5-18B LO Arm, too dark and tip of arm is even darker, I stretched and got it lighter.
Attachment 5092
5-18C R ARM SAME AS LEFT ARM
Attachment 5093
5-18D Seat cushion, not sure if darker spots are showing up?
>>> 5-18A Back is too dark
Was the back done as recommended? - ‘Razor-60 off existing topcoat during the Degreaser-2.2 > Acidifier-2.0 > Hydrator-3.3 process makes wicking the contamination easier.”
>>> what about ordering micro-54 and giving it a light coat to lighten up and even out the color?
Yes can be done, but have to consider the contamination below the surface if it going to affect adhesion.
It is wiser as well to remove the contamination as thoroughly as possible for not affecting the finish.
And Adhesor-73 recommended as well to ensure proper adhesion.
>>> 5-18D Seat cushion, not sure if darker spots are showing up?
Micro-54 for covering up with a lightening effect is the solution if refinishing with transparent dyestuff dark marks camouflaging effect is not desirable. However, transparent Aniline-76 is also recommended as a secondary coating to produce an ‘Aniline Effect’ will not deviate the original finish too far with the desired beauty of depth.
Tips:
Cut the custom matching dyestuff with Aniline-76 Clear to control or reduce color intensity.
Roger Koh
Leather Care Consultant / Practitioner / Instructor
Attachment 5123
5-21A Covered darker areas with Micro-54 to blend and even out appearance.
Attachment 5125
5-21B Finished with Aniline-76 and looks and feels great, still slightly dark.
Attachment 5126
5-21C close up of finished seat cushion
Attachment 5127
5-21D close up of finished back
When compared with the before picture.
I think but most certain that I would be a happy client as well.
And would rave about your services.