http://i300.photobucket.com/albums/nn4/Rogerkoh/Auxiliary3-1.jpg
Leather Dyeing & Coloring Auxiliary (3):
Leather Adhesion Coating,
Leather Doctor® Adhesor-73
It’s an auxiliary for Pigmented and Aniline leathers refinishing.
This is an aqueous compact resin adhesion promoter to ensure proper adhesion prior to color coating.
It's also added to Aniline Dye-21 for dye coating absorption resistant areas to reduce color blotchiness.
And it’s also used after WaxEffect8.6 prior to top coating.
This product is also available in concentrate to be cut with distilled water at a ratio of 1: 1.
Thus a quart makes 2 quarts of Ready-To-Use product to save on shipping.
Ready-To-Use packing sizes are available in 60ml, 250ml and in Quart.
Concentrate packing sizes are available in quart (2 quarts).
Email
[email protected] for prices.
Note:
Strip clean of foreign contamination prior to application – use Prep-7.7 > Cleaner-3.8 > Rinse-3.0.
Instruction:
1] Shake well, hand padding preferred to ensure better anchorage for non-absorbent leathers.
2] Fine airbrushing for absorbent leathers to reduce patchiness.
3] Let dry naturally or speed dry with blow dryer.
3] Proceed with choice of further coating.
http://i300.photobucket.com/albums/nn4/Rogerkoh/AnilineSystem12.jpg
Aniline Leather Dyeing System (12):
Aniline Orange Dye,
Aniline Yellow Dye,
Aniline Dark-Brown Dye,
Aniline Gloss Topcoat.
Leather Doctor® Aniline Dye-21
It’s for staining absorbent aniline leathers.
This is a new generation aqueous transparent staining aniline dyestuff that is more lively and brilliant than most liquid dyes.
It’s to provide a more superior light fastness and fades resistance than most standard liquid dyes.
For coating aniline leathers that has existing topcoating; add up to 30% Adhesor-73 to even out appearance.
Standard colors available in Black-115, Orange-157, Red-180, Red-Brown-159, Yellow-128, Dark-Brown-124, Rubine-113 and Blue-119.
This product is also available in concentrate to be cut with distilled water at a ratio of 1: 8.
Thus a 120ml makes 1.14 quarts of Ready-To-Use product to save on shipping.
Ready-To-Use packing sizes are available in 60ml, 250ml and in quart.
Concentrate packing sizes are available in 120ml (1.14), 250ml (2.37) and quart (9 quarts).
Email
[email protected] for prices.
Instruction:
1] Prep clean - use Prep-4.4 follows by Cleaner-3.8 then Rinse-3.0.
2] When prep clean using Degreaser-2.2 either rinse with Acidifier-2.0 for bleeding control or with standard Rinse-3.0.
3] Inspection when dry – use leather Eraser-4 to remove wick-up soiling particulates.
4] Shake well before application.
5] For adhesion surface coating - add 10 to 30% Adhesor-73 (less is more natural).
6] Airbrush to even out the color avoiding streaks or drips.
7] Blow dry in-between coats until desired result is achieved.
8] Leather rejuvenation – use Hydrator-3.3 follows with Fatliquor-5.0.
9] Topcoat protection to match original luster - use Aniline Topcoat-89N(natural), Aniline Topcoat-59M (waxy matte) or Aniline Topcoat-79G (gloss).
Leather Doctor® Aniline Topcoat-79G
It’s a gloss finish for upholstery Aniline leathers.
This is an aqueous fine particular size urethane resin emulsion topcoat.
It’s to protect aniline dyestuff with excellent toughness and flexibility.
This product is also available in concentrate to be cut with distilled water at a ratio of 1: 1.
Thus a quart makes 2 quarts of Ready-To-Use product to save on shipping.
Ready-To-Use packing sizes are available in 60ml, 250ml and in quart.
Concentrate packing sizes are available in quart (2 quarts).
Email
[email protected] for prices.
Instruction:
1] Apply after Aniline Dye-21; otherwise prep clean - use Prep-4.4 follows with Cleaner-3.8 then Rinse-3.0.
2] Pad or fine spray without streaks or drips.
3] Non-Stick, Rub-Resistance buttery-feel protection with a classic leather scent - use Protection-B+ (leather Scent-B).