Lamp

[pristine]

Do you recommend using the same procedure for full aniline leather as for this piece?

[Roger Koh]

http://i300.photobucket.com/albums/nn4/Rogerkoh/P10100101.jpg

“Do you recommend using the same procedure for full aniline leather as for this piece?”



I suggest dry soil removal using anilineEraser4™ alone may accomplish the job.

And as for the fringe using nubuckEraser5™ for the suede side accomplish the job too.

Otherwise for a full “wet cleaning” all components have to be tested for colorfastness.

Also take into consideration that there are overlapping layers too that may cause problem if the leather is highly absorbent with excess dyestuff.

Wet clean as follows: preClean4.3™ (option) > clean3.8™ > rinse3.0™ > fatliquor5.0™ > leatherScent’W™.

Wet cleaning is the last resort if “dry soil removal” alone does not accomplish the desired result.

Roger Koh
Leather Doctor® System


Tips of Posting Picture:

1. Go to photobucket.com and set up an account (free)
2. Click the IMG Code below the selected picture (a yellow highlight “Copied” appears)
3. Come to the forum posting white areas and click “paste”.