You certainly can color refinish it again, with this closest match...
http://i300.photobucket.com/albums/nn4/Rogerkoh/Micro-Pigment12.jpg
Semi-Aniline Leather Coloring System (12):
Micro-Pigment Black Color,
Micro-Pigment White Color,
Micro-Pigment Tan Color,
Micro-Pigment Ochre Color,
Micro-Pigment Maroon Color,
Micro-Pigment Yellow Color,
Micro-Pigment Orange Color,
Micro-Pigment Red Color &
Micro-Pigment Blue Color.
Micro-Pigment Gloss Topcoat,
Micro-Pigment Satin Topcoat &
Micro-Pigment Matte Topcoat.
Leather Doctor® Micro Pigment-54
It’s micro-pigment for semi-aniline leathers.
It's an aqueous soft compact resin blend high performance pigment color; strong against UV light than standard pigment.
Standard colors available in Black-512, White-505, Tan-586, Ochre-584, Maroon-502, Yellow-526, Orange-504, Red-554 and Blue-540.
This product is also available in concentrate to be cut with distilled water at a ratio of 1: 0.5.
Thus a quart makes 1.5 quarts of Ready-To-Use product to save on shipping.
Ready-To-Use packing sizes are available in 60ml, 250ml and in quart.
Concentrate packing sizes are available in quart (1.5 quarts).
Email
[email protected] for prices.
Instruction:
1] Prep clean - use Prep-7.7 follows by Cleaner-3.8 then Rinse-3.0.
2] Leather rejuvenation – use Hydrator-3.3 follows with Fatliquor-5.0.
3] Strengthen weak and worn areas - use Impregnator-26
4] Ensure adhesion - use Adhesor-73.
5] Control flow and color stability - use Thickener-48.
6] Ensure anchorage – pad first coat avoiding streaking for better penetration.
7] Ensure uniformity - fine spray and allow in-between drying with subsequent light coat.
8] Topcoat protection - use Topcoat Micro-72 Gloss, Matte or Satin.
Leather Doctor® Micro Topcoat-72G
It’s a gloss finish for Micro-Pigmented, Semi-Aniline leathers.
This micro-pigment topcoat is an aqueous soft polyurethane leather topcoat.
It is lightfast and non-yellowing.
It has excellent flow and leveling properties.
Recoatable and forms a flexible film coat.
It gives good performing results when used for fine semi-aniline effects.
This product is also available in concentrate to be cut with distilled water at a ratio of 1: 1.
Thus a quart makes 2 quarts of Ready-To-Use product to save on shipping.
Ready-To-Use packing sizes are available in 60ml, 250ml and in quart.
Concentrate packing sizes are available in quart (2 quarts).
Email
[email protected] for prices.
Instruction:
1] Apply after color coat otherwise prep clean - use Prep-7.7 follows with Cleaner-3.8 then Rinse-3.0.
2] Satin finish - mix Matte with Gloss.
3] Fine spray evenly a panel at a time for even coverage avoiding drips and spits.
4] Buttery-feel, non-stick rub-resistant protection with a classic leather scent - use leather Scent-B.
Leather Doctor® Micro Topcoat-72S
It’s a satin finish for Micro-Pigmented, Semi-Aniline leathers.
Gloss is more durable than satin finish.
This micro-pigment topcoat is an aqueous soft polyurethane leather topcoat.
It is lightfast and non-yellowing.
It has excellent flow and leveling properties.
Recoatable and forms a flexible film coat.
It gives good performing results when used for fine semi-aniline effects.
This product is also available in concentrate to be cut with distilled water at a ratio of 1: 1.
Thus a quart makes 2 quarts of Ready-To-Use product to save on shipping.
Ready-To-Use packing sizes are available in 60ml, 250ml and in quart.
Concentrate packing sizes are available in quart (2 quarts).
Email
[email protected] for prices.
Instruction:
1] Apply after color coat otherwise prep clean - use Prep-7.7 follows with Cleaner-3.8 then Rinse-3.0.
2] Fine spray evenly a panel at a time for even coverage avoiding drips and spits.
3] Buttery-feel, non-stick rub-resistant protection with a classic leather scent - use leather Scent-B.
Leather Doctor® Micro Topcoat-72M
It’s a matte finish for Micro-Pigmented, Semi-Aniline leathers.
Satin is more durable than matte finish.
This micro-pigment topcoat is an aqueous soft polyurethane leather topcoat.
It is lightfast and non-yellowing.
It has excellent flow and leveling properties.
Recoatable and forms a flexible film coat.
It gives good performing results when used for fine semi-aniline effects.
This product is also available in concentrate to be cut with distilled water at a ratio of 1: 1.
Thus a quart makes 2 quarts of Ready-To-Use product to save on shipping.
Ready-To-Use packing sizes are available in 60ml, 250ml and in quart.
Concentrate packing sizes are available in quart (2 quarts).
Email
[email protected] for prices.
Instruction:
1] Apply after color coat otherwise prep clean - use Prep-7.7 follows with Cleaner-3.8 then Rinse-3.0.
2] Satin finish - mix Matte with Gloss.
3] Fine spray evenly a panel at a time for even coverage avoiding drips and spits.
4] Buttery-feel, non-stick protection with a classic leather scent - use leather Scent-B.