These are the products you need.
Leather Doctor® Degreaser-2.2:
It's for all Pigmented, Aniline, Vachetta, Nubuck and Suede leather types.
This is a pH 2.2 high viscosity aqueous formulated leather degreaser.
It’s primarily for degreasing leather of penetrated oil and grease stains from skin and hair contact prior to refinishing.
Also assist in removing solvent based stains like permanent marker, paint and nail-polish.
Oil and grease based stains like: crayon, wax, ballpoint ink and lipstick.
Dye-transfer stains from blue jeans, ink prints and newsprints.
Leather Doctor® Cleaner-3.8:
It's for all Pigmented, Aniline, Nubuck and Suede leather types.
This is a pH 3.8 all purpose leather-safe anionic cleaner that is particularly effective in emulsifying oily soils and in suspending particulates.
It cleans by penetrating, lubricating and suspending soiling safely and effectively through gentle chemical reaction.
With its leather-safe pH value, it works in perfect harmony with all leather constituents that include the tanning agent, preservative, dyestuff and especially the fatliquor.
Leather Doctor® Rinse-3.0:
It's for all Pigmented, Aniline, Nubuck and Suede leather types.
This is a pH 3.0 aqueous leather-safe rinse to neutralize harmful alkaline and perspiration residues.
It’s for stabilizing and strengthening leather constituent pH chemistry integrity.
And cationizing (+ve) protein fiber below its isoelectric point to increase hydrogen bonding prior to anionic (-ve) Fatliquor-5.0.
Leather Doctor® Hydrator-3.3:
It’s for Pigmented, Aniline, Nubuck, Suede, Hair-on and Woolskin leather types.
This is a pH 3.3 aqueous leather-safe hydrator.
It’s for hydrating dried, stiffed or shrunk leathers (to separates the crushed, stick together fibrils and relax them) prior to strengthening and softening with Fatliquor-5.0.
And it’s also used for facilitating colloidal water movement within the leather structure capillary motion during the wicking process.
That will cause suspended soil particulates to be moved to the leather surface to be extracted with rag while damp and erase with Leather Eraser-4 when dry.
Leather Doctor® Fatliquor-5.0:
It’s for Pigmented, Aniline, Nubuck, Suede, Hair-on and Woolskin leather types.
This is a pH 5.0 anionic charged micro emulsion fatliquor leather rejuvenator.
It’s for replenishing original fatliquor that diminishes thru sun-bleaching, ageing, heat and alkaline exposure or cleaning.
It penetrates and lubricates the leather fibers so that after drying they will be capable of sliding over one another smoothly.
Besides softening the leather with stretchability, compressibility and flexibility, it enhances the leather rip resistance tensile strength greatly.
Thus relaxes coarse breaks, creases and wrinkles to provide drapes, suppleness and prevents cracking.
It helps to keep leather at its optimum physical performance and prevent premature ageing.
Leather Doctor® Leather Scent-W:
It’s for waxed Aniline, Vachetta and split Suede leather types.
This is a non-film forming, non-stick protector that enhances a soft natural waxy-feel with a classic leather scent that charms.
It imparts a non-stick breathable barrier essentially to shield the detrimental effects of sticky soiling including the nasty ballpoint ink.
And it does help to release those tenacious dye-transfer stains especially on light colored leathers easily without resorting to unnecessary color refinishing.
Its natural waxy-feel protection increases the leather resistance to wet and dry rubs, thus reduce stretch, scuff and abrasion.
And it reduces friction squeaks that wear the finishes when leather rubs against leather during movement.
To reduce sheen and scent add Waxy Feel-47.
Tools that you need are:
Leather Brush-1 or other equivalent horsehair brushes.
Small Travel Iron (Steam not required)
Plain white printing paper
Towel
I believe you have the product price list I email you.
When you have these products and tools ready we shall start.
Roger Koh
[email protected]