Here is the leather problem-solving guide for Nubuck
10454
And this is the recommended kit
10455
And the link to Kit-N5.uk
https://www.leatherdoctor.com/leather-nubuck-urine-odor-killer-kit-n5-uk/
Here are tips for urine
Tips on Urine:
Urine is a compound waste discharge, comprised of urochrome, uric acid, and ammonium salt to deal with. When deposited urine attracts the natural bacteria from the atmosphere and starts to ferments, a putrid odor will develop from the protein component of the urine and ammonic odor will develop from the ammonium salt. When ammonic odor becomes present, the pH of the contamination would have shifted to 10. Such high pH above the neutral average 3 to 5 of leather causes the amphoteric protein fiber to shift ionic negative (-ve); that causes the protein fibers to repels its other ionic negative (-ve) constituents like the tanning agent, fatliquor, and dyestuff. Behaving just like the attraction of a magnet, like poles repel. When the leather constituent breaks hydrogen bond with the protein fiber, the leather starts to denature and revert to rawhide. A typical appearance of an aged or compounded contamination is a darkening effect from the fugitive tanning agents, a whitening effect from the fatliquor. Fugitive dyestuff or bleeding is only apparent from a white towel detection and yellowing from the urochrome. The denaturing or reverting to the rawhide effect of the leather is further confirmed by tackiness or in worst-case sliminess in the presence of moisture. The leach-out fatliquor results in stiffness and fugitive dyestuff results in discoloration. A systematic sequence of decontamination approach includes surface residue removal with CleanUrine-1.5 (pH 1.5), and rinse with Acidifier-2.0 (pH 2.0) recharging the protein fiber ionic positive (+ve) and neutralizing the ammonium salt with KillUrine-2.1 (pH 2.1). Utilizing such a low pH treatment retards bacteria activities from off-gassing putrid odors, a natural pH control without the need to use bactericide or fungicide for mold prevention. Therefore, urine is a type of soiling that will require a biochemistry approach to decontaminate it. Restoring the leather begins after decontamination with Hydrator-3.3, a pH 3.3 multifunctional product that has ionic positive (+ve) charging abilities, an active surfactant essential for foreign water movement within the inter-fibrillary spaces to redistribute the leather constituents and purging foreign contamination to resurface. This is the last of the wet cleaning process to remove suspended urochrome yellowish compounds through visible white tissue paper as an extension of the leather in the wicking process as the leather dries naturally. Only then, without a trace of the urine stain that Fatliquor-5.0 (pH 5.0) replenishing commences. The emulsified fat and oil encased water molecule breaks free when hydrogen bond attraction takes place between the fat and oil with the protein fiber, leaving a breathing space essential for leather transpiration to function naturally. The fat plumps the leather with fullness from easily collapsing into creases and wrinkles during stress or flex, while the oil lubricates the fibers so that they slide over one another like millions of inter-connecting hinges with smoothness. One important unique characteristic of leather is suppleness with strength and much depends on the fatliquor, in this holistic approach to effective leather urine decontamination and restoration. For severe neglected cases with finishes damages as seen in this picture, refinishing commences after leather suppleness restoration.
10456
Roger Koh
Leather, Skin, Hair, Eye & Acne Care System Formulator
Consultant / Practitioner / Instructor / Coach
web: www.leatherdoctor.com
forum: www.leathercleaningrestorationforum.com
email:
[email protected]