PDA

View Full Version : Larkin Cigar Sofa by Four Hands



needhelp
09-04-2020, 10:51 AM
Hi,

Hoping for some guidance. Just received this used 5-year old sofa and am unsure about the level of restoration needed. It is top-grain cigar leather and the item descriptions also refer to it as having a distressed look. I’m not certain how to differentiate between “wrinkles” and “cracks” in the leather and which need repair and which are just part of owning a sofa with this type of leather and treatment. Some areas have more tiny wrinkles than others, and while the majority are light in color and visible in the photos.

You can feel those wrinkles when running your hand across the sofa, but it doesn’t feel particularly rough to the touch. Against bare skin on the legs, it is much more noticeable.

Have I given you enough to go on to determine whether the wrinkles are expected and natural or if this is the result of negligence on the part of the previous owner?

Do you have any recommendations for restoration?

Pictures coming shortly.

needhelp
09-04-2020, 10:55 AM
https://i.ibb.co/qsb07Kn/63147011-C70-A-401-B-A2-BE-95-F30-DD49145.jpg (https://ibb.co/Njw1t53)
https://i.ibb.co/wKTbfQf/A2520496-8868-4091-AC42-FC0-F24-E3-D2-EE.jpg (https://ibb.co/tbSN929)
https://i.ibb.co/HdDxfgq/2-EEAB0-D8-6203-4829-A79-D-2-EBBF469-ED43.jpg (https://ibb.co/q5MW31p)
https://i.ibb.co/XWzsZvB/073-B27-D7-27-FB-4664-AE4-F-D225-F4-C868-E8.jpg (https://ibb.co/QJ6NF1B)
https://i.ibb.co/r0w8CgJ/0773-F05-F-49-F7-4914-85-C1-EBCB3-EB351-DA.jpg (https://ibb.co/pwLVtgp)
https://i.ibb.co/7xfh3Rr/89-B4-CE52-93-CE-471-C-88-E6-5-B82825-D5-E5-B.jpg (https://ibb.co/ZRj9QYc)
https://i.ibb.co/6FsQZGC/3-E415-FCC-483-D-48-B0-BB98-6-E69137-B75-AE.jpg (https://ibb.co/4pNkfCr)
https://i.ibb.co/xYy41b4/01-FCC359-020-D-4-DC3-9941-4712-F842-A0-A1.jpg (https://ibb.co/gdGnS8n)

Roger Koh
09-05-2020, 07:10 PM
>>> Do you have any recommendations for restoration?

You will need a restorative cleaning described by Leather Aniline Wax Pull-up Care Kit-Aw3.
As follows, and please read and ask further questions.
10123

Restorative Care:

Restorative care is the ultimate corrective or salvage care system that removes accumulated soiling including aged conditioners to its original OEM finishes. Accumulated soiling that fills creases is often mistaken for cracks. Restorative cleaning is performed by Prep-4.4. It works by chemical reaction to emulsify soiling through its penetrating, lubricating and suspending power. Its thick as honey viscosity facilitates coating the surface for effective dwell time. Horsehair detailing Brush-1 is recommended to worked into heavily soiled areas sufficiently to avoid excessive agitation that might damage already weaken finishes, especially on heavily used areas. For extreme cases, the Prep-4.4 can stay continuous for up to 72 hours to do its work safely including ‘reverse transferring’ of unwanted dye stains from new blue jeans, newsprints and ballpoint ink.

Instruction . . .

1st step - Restorative Cleaning:

1- Apply Prep-4.4 and agitate with horsehair Brush-1, ensuring a uniform application over the entire surfaces a section at a time.
2- Allow a dwell time of 10 to 30 minutes or before it dries prior to towel extraction until it shows clean.
3- Sticky residue is removed by Clean-3.8 with gentle brush agitation and towel extraction until it shows clean.
4- Remaining residues are spray rinse with Rinse-3.0 and towel extract to a squeaky-clean.
5- Let dry and inspect for satisfaction, otherwise repeat Prep-4.4 with Towel-T5 for a ‘reverse transfer for dyestuff stains, application with a longer dwell time as necessary and check for reverse transfer satisfaction.
6- Proceed with Hydrator-3.3 after Rinse-3.0 and satisfied inspection.

2nd step – Hydrating:

Hydrating is essential to relax unnatural creases and wrinkles. Leather shrunk and becomes stiff when the structural fibers become stick together as the fatliquor diminishes through aging or under heat over-exposure or under influence of alkaline solution. They are stretched crosswise when the leather is plump. Plumping the stiff leathers may take up to 72hrs under evaporation control. Besides, its pH value of 3.3 helps charge the protein fiber ionic positive (+ve) to increase the hydrogen bonding attraction between the ionic negative (-ve) fatliquor at the molecular level.

Instruction . . .

1- Spray Hydrator-3.3 control and spread with a foam brush to hydrate deep into the leather thickness.
2- Let dwell 10 to 30 minutes to break surface tension, depending on severity of dryness, with optional plastic cling wrapping to control evaporation for a longer dwell time up to 72hrs, to plumps the leather more effectively for ease of cross stretching unnatural creases and wrinkles.

3rd step – Fatliquoring:

Fatliquor evaporates as VOC (volatile organic compound) when temperature rises especially from exposed micro crazing and stitching rows. Periodic fatliquor (ionic negative (-ve) charged emulsion of natural fat and oil) replenishing maintains the leather’s structure integrity and pliability thus increase leather tensile strength with softness and added intensifying color richness.

Instruction . . .

1- Spray Fatliquor-5.0 after shaking in like manner as Hydrator-3.3 and let dry naturally.
2- Repeat application while still damp about 25% moisture content remaining in between drying until saturated again.
3- Leave the leather for slow natural drying for extra softness.
4- Wipe surface strays with Hydrator-3.3 to free of sticky residue.

4th step – Wax Effect Rejuvenating:

EffectWax-8.6 rejuvenates the structural wax pull-up effect and coagulates a cloudy waxy coating on the surface to be heat activated into the characteristic glossy sheen.

Instruction . . .

1- Shake well, spray and brush EffectWax-8.6 with sufficient penetration or saturation for an even appearance and let dry naturally.
2- When fine wax crystalline forms within 8 hours or until it appear, it is thereby activated with a heat blower or hot hair dryer to convert into a natural characteristic gloss.

5th step – Top Coating (optional):
AnilineTop76G is applied accordingly to achieved or match the desired gloss level.

Instruction . . .

1- Shake well and apply with bristle or foam brush with the lightest touch to reduce streaking.
2- Complete dry between each coating with the help of dryer and using a new brush will reduce streaking as well.

6th step – Protection:

Instruction . . .

1- When dry, apply Protector-D after shaking well, towel spread and is ready for use when dry.