PDA

View Full Version : Landau semi aniline chair (1of2)



chet
06-09-2020, 06:48 AM
Hey roger this is pat again. i finally found time to fix this post. so here is the semi aniline chair with severe sun fading not many scratches or much repair work just a good dye job needed. i have done all steps up to adhesor so i will have final pictures of this one soon.
1a scope:
10013

1b side a
10014

1c side b
10018

1d back
10019

2a swatch color test
10020

2b swatch color test
10021

3a close up arms
10022

3b close up arms
10023

i tried to retake the pictures to help this post but for some reason no matter how i rotate the image when it gets uploaded it flips sideways or upside down.

Roger Koh
06-10-2020, 12:02 PM
Thanks,

Like to see your refinishing result!

chet
06-16-2020, 09:58 AM
Hey roger, its pat again. just wanted to send you some pics of the arms they are a little more noticeably worn after the adhesor and doesnt have the squeeky feel like the rest of the leather. just wondering if i should apply some impregnator before going through with the dye process or if you had any other ideas

1a scope:
10049

2a left arm:
10050

2b left arm close up:
10051

3a right arm:
10052

3b right arm close up:
10053

Roger Koh
06-18-2020, 12:31 PM
>>> so here is the semi aniline chair

This looks "Aniline" finish to me.

Roger Koh
06-18-2020, 12:36 PM
>>> doesnt have the squeeky feel like the rest of the leather.

Healthy leather will have a squeaky feel.

You will need to pH balanced until it turns squeaky.

Use low pH value cleaner like ProCleaner-1.5 > Acidifier-2.0 system right into the leather structure.

You may have to strip off the Adhesor-73 with Stripper-2.3 to get into the leather grains.

It is leather dry rotting that is why it does not feel squeaky, understand?

Stripper-2.3 > Acidifier-2.0 > Hydrator-3.3 > Fatliquor-5.0 > Hydrator-3.3 > check squeakiness of leather prior to > Adhesor-7.3

chet
06-23-2020, 06:20 AM
pat again: so ive gone back to the acidifier hydrate and fatliquor method the arms seems to be soaking up quite a bit of moisture so your probably right about the dry rotting but the rest of the piece doesnt like to absorb moisture easily or scratch so i still believe this is a semi aniline piece but where its more worn like the arms seat and back i can agree is just aniline

Roger Koh
06-24-2020, 10:02 AM
>>> i still believe this is a semi aniline piece but where its more worn like the arms seat and back i can agree is just aniline.

By appearance, this looks more aniline because of its depth of transparency that shows the Sauvage grains through.

chet
06-25-2020, 07:07 AM
you definitely know more than i do about leather so ill take your word on it being a true aniline. ive tried to acidify the leather before going through with heavy hydration and applying fat liquor as it dried then hydrator again to remove the oily residue im getting little to no change on the arms should i be allowing the acidifier to dwell for a longer period? i originally saturated it with clean pro then use acidifier and a towel to extract then i go through with the basic hydrate and fat liquor methods and have been repeating the hydration steps for a few days with no success.

Roger Koh
06-27-2020, 12:10 PM
>>> im getting little to no change on the arms

What are you trying to accomplished?

chet
06-30-2020, 05:48 AM
we established i should get the arms to a nice squeeky feel before moving onto adhesor.

Roger Koh
06-30-2020, 09:16 AM
The ProCleaner-1.5 > Acidifier-2.0 should help you achieve your desired result, let me know.