PDA

View Full Version : Shapland Aniline Chairs


chet
02-14-2018, 07:35 AM
83088307830983108311831283138314

We have these chairs that had severe oil spots. I was able to remove all of the oil for now. It has been cleaned and hydrated. What should we use to dye this. Any other recommendations?
Roger Koh
02-14-2018, 10:32 AM
>>> We have these chairs that had severe oil spots. I was able to remove all of the oil for now.

What have you used to removed these oil spots?


>>> It has been cleaned and hydrated. What should we use to dye this. Any other recommendations?

1- Balance up the color difference with Aniline-21 (probably a mix of orange and yellow).
2- Use Hydrator-3.3 to redistribute the color evenly.
3- While still damp Replenish with Fatliquor-5.0 for suppleness when dry.
4- Dry preparation.
5- Refinishing with Antique-27 as an option to further even out the color difference and proceed with Aniline-76 for a final appearance.
6- Topcoat with AnilineTop-76G
7- Protect with Protector-B/B+

Roger Koh
Leather & Acne Care System Formulator
Consultant / Practitioner / Instructor / Coaching
web: www.leatherdoctor.com
forum: www.leathercleaningrestorationforum.com
email: [email protected]
chet
02-14-2018, 01:09 PM
We are sending you a swatch for color match. Please call or email us when you get the sample so we can discuss how much of each dye we will need to make this repair.
Roger Koh
02-14-2018, 01:13 PM
Matching both Antique-27 and Aniline-76?
chet
02-28-2018, 09:52 AM
Yes please
Roger Koh
02-28-2018, 02:02 PM
Your Email decision is a quart both for Micro-54 (opaque) and Aniline-76 (transparent) - correct?
chet
03-05-2018, 05:31 AM
Yes, we need one of each. Its a common color so we can use the extra in future projects.
Roger Koh
03-05-2018, 12:12 PM
PayPal invoice send on 26-Apr-18, still waiting for your confirmation.
chet
03-28-2019, 04:36 AM
9259
3-4 A Chair after we dyed it the first time, color is off and too much micro54 so it didn't look right.

9257
3-28A Finished chair

These chairs were finished 6 months ago but improperly dyed so we completely re-stripped and refinished again. We used Aniline 21 to bring back as much color as possible then Micro 54 to even up damaged areas with several colors then used Aniline -76 reddish tone and then a dark tone with airbrush and sponge to get the 2 tone effect. Final topcoat with Aniline 76.

9258
3-28B close up of wrose arm, dramatically improved but not perfect.
Roger Koh
03-28-2019, 07:44 AM
My recommendation for color matching is to have it done in-house for better control.