>>> Here are a few more photos of the console. I thinking of Degreaser 2.2 saturated in a paper towel and then draped over the top of the console to give the stain and soil some place to go.
You may use Degreaser-2.2 > Acidifier-2.0 system for this unknown stain and see if it response.
Test out only the smallest spot using a saturated cotton swab and work out the stain.
When the cotton swab show soiling change, saturate work until the cotton swab shows clean.
Any remaining residue of the stain may be left to dwell with the degreaser for a longer time for the stain to resurface and then rinse with Acidifier-2.0 using the cotton swab method.
You may also spot test on different soiling types and condition to see how the Degreaser-2.2 > Acidifier-2.0 system-1 response before doing the actual work.
General accumulative soiling removal is performed with the Prep-4.4 > Clean-3.8 > Rinse-3.0 system-2 and you may repeat the same methods for a comparison which system performs a better result.
Other known stain when positively identified is done according to the Leather Problem Solving Matrix.
Note that the Hydrator-3.3 > Fatliauor-5.0 > Hydrator-3.3 system is the end of the continuous wet system and the leather should not be left to completely dry up prior to Fatliquor-5.0, otherwise the existing cracks becomes more obvious. Repeat! To control the existing cracking conditions remember not to let the leather completely dry without the Fatliquor-5.0.
Let’s see some pictures how the test response, before the actual application.
Roger Koh
Leather Care System Formulator
Consultant / Practitioner / Instructor
web: www.leatherdoctor.com
email:
[email protected]