PDA

View Full Version : Brickman Barstool seats and back - Saddle leather, Minor scratches, dirty (few deeper) Wants to change to Dark Brown



chet
04-22-2016, 12:48 PM
4/22 A 6407
4/22 B 6408
4/22 C 6415
4/22 D 6414
4/22 E 6413
4/22 F 6412
4/22 G 6411
4/22 H 6410
4/22 I 6409
4/22 J 6416

The swatch I am sending you is the color he wants. We could not obtain A swatch because of how it is attached. But it is a saddle leather From Italy.
Are we going to need Micro-54 or Pig-64? I have question marks on the order sheet because I am not sure which is best option.

There are some minor scratches and then some deeper "dents/Scratches"

Let me know what you think after you have looked at the pictures.

Roger Koh
04-26-2016, 12:19 PM
>>>Are we going to need Micro-54 or Pig-64?
Use Micro-54 + 10% Thickner-48 for better flow control.


>>> There are some minor scratches and then some deeper "dents/Scratches"
Minor Scratches are smooth out with Adhesor-74.
Deep dents may need a massage up with a good dwell with Hydrator-3.3 (but since it is “tooling leather” might be tough to revive it).
Deep Scratches may be work with a combination of Bond-3D + Stucco-90 + Micro-54 to fill them up.


>>> Let me know what you think after you have looked at the pictures.
Recommend that the existing finishes be stripped with Stripper-2.3 to reduce build-up.