PDA

View Full Version : Aniline (Full) - protected sofa and chair with pigment loss and scratches - for "Smith"



chet
12-14-2015, 09:52 AM
5889589758965895589458935892589158905898

Roger Koh
12-14-2015, 10:03 AM
Color sample send?

Roger Koh
01-05-2016, 01:29 PM
Sample received is ‘Aniline’.

Aniline-76 alone may not able to produce the desired results due to uneven wear to the heavily used areas especially the seat cushion, thus to even out the absorbent rate ‘Adhesor-73’ is used first to seal off leather surface grain porosity at the first step in color restoration.

The second step is to block off difference in appearance with an opaque pigment like Micro-54 to achieve an even appearance.

The third step is to increase the beauty of depth with ‘Aniline-76’, a coating transparent matching dyestuff coats over to achieve closed to the original appearance.

Protector-B protect the leather from friction wears thus prolongs the life of the leather finishing.

Your order was for 2 quarts of custom color Micro-54

Let me know your final requirements for the colors.

Recommended Refinishing Sequences:

A) Preparation Cleaning by Prep-4.4 > Clean-3.8 > Acidifier-2.0 (used areas) / Rinse-3.0 (unused areas).
B) Leather Rejuvenating by Hydrator-3.3 > Fatliquor-5.0 > Hydrator-3.3
C) Color Refinishing by Adhesor-73 > Micro-54 > Aniline-76 > AnilineTop-76
D) Finishes Protection by Protector-B or B+

chet
02-22-2016, 08:44 AM
Roger, did these dyes ever get ordered?

Roger Koh
02-22-2016, 05:51 PM
Invoice No 11-0475 for 'Stacey Smith'

Tracking No CX 536 832 432 CA (Canada Post)

Delivered 2016/02/05 Time 10:31