chet
07-07-2015, 06:42 AM
Roger, we have custom mixed Micro-54 dye to repair these cushions but I want to check my sequence of repair.
Prep 7.7 agitate, extract reapply and dwell overnight
Clean 3.8 agitate, extract repeat till towels show clean
Rinse 3.0 extract till squeaky clean
Hydrate- overnight and cover so they soak up Hydrator
Fatliquor- overnight and allow to air dry- may re-apply hydrator
Rinse lightly- to remove any fatliquor on surface
Impregnator- on damaged areas- wipe off excess, dry and repeat until cracks are strengthened (can I mix some dye with impregnator?)
glue any flaps down
sand as necessary to insure smooth
Apply adhesor- scrub in and wipe off excess
Apply Micro-54
Sand in between coats if necessary
Apply MicroTop Satin
5282
7-7A Overall 8 small cushions
5283
7-7B Worse cushion
5284
7-7C Flaps that need to be glued down
5285
7-7D Cracks that need strengthening
Prep 7.7 agitate, extract reapply and dwell overnight
Clean 3.8 agitate, extract repeat till towels show clean
Rinse 3.0 extract till squeaky clean
Hydrate- overnight and cover so they soak up Hydrator
Fatliquor- overnight and allow to air dry- may re-apply hydrator
Rinse lightly- to remove any fatliquor on surface
Impregnator- on damaged areas- wipe off excess, dry and repeat until cracks are strengthened (can I mix some dye with impregnator?)
glue any flaps down
sand as necessary to insure smooth
Apply adhesor- scrub in and wipe off excess
Apply Micro-54
Sand in between coats if necessary
Apply MicroTop Satin
5282
7-7A Overall 8 small cushions
5283
7-7B Worse cushion
5284
7-7C Flaps that need to be glued down
5285
7-7D Cracks that need strengthening