For a complete repair to the corner, leather rejuvenating to restore puffiness, skin repairs to smoothness and color refinishing you will need the following products system. I will go into the sequence of each phase when you are ready to proceed.
1: Bond-3D
2: Bond-7A
3: Kit A7.cl (aniline coating “transparent” black)
3697
Leather Doctor Leather Bond-3D (30ml)
Leather Doctor® Leather Bond-3D is for leather structure bonding repairs, such as abrasion, cat-scratch, and filling repairs with Stucco-90, Pigment-64, Micro-54, Anline-76 and Aniline-21. This waterbased medium soft polyurethane leather bond will not lift the leather finishes unlike other dry solvent-based glue. Works in conjunction with leather Patch-4S as sub patch and suede fibers as fillers. Excess clean up when dry will require the help of Bond-7A.
3698
Leather Doctor Leather Bond-7A (30ml)
Leather Doctor® Leather Bond-7A is a bond smoothening aid and excess clean up after Bond-3D. This is a soft nitrocellulose lacquer emulsion bonding aid to level and remove excess Bond-3D from leather surface safely without the need for sanding.
3699
Leather Doctor Kit A7.cl – Aniline Leather Dye Refinishing Kit
Leather Doctor® Kit A7.cl, aniline leather dye refinishing kit is designed for dyestuff and topcoat refinishing from the simple sunlight fading to the severely sweat damages from body oil and grease. Most severely penetrated, prolonged and neglected stains show a darkening effect with a sticky feel have its topcoat and dyestuff probably deteriorated by the sweat. When the stain feels sticky, it is a sign of leather denaturing and reverting to rawhide from breaking of bonds with the tanning agent. When sign of color is transfer to a white towel, it indicates that the dyestuff has also break bonds with the protein fiber. When leather is stiff or shows signs of whitish residue migrating, it shows that the fatliquor is breaking bonds as well with the protein fiber. The main component of the leather protein fiber is amphoteric while the other constituents are not; shifting of the pH mainly caused from sweat to alkalinity affects the pH imbalance. To revert from denaturing into rawhide prior to topcoat refinishing, contaminated alkaline soiling is removed with Degreaser-2.2, a waterbased (pH 2.2) multifunctional degreaser that emulsifies greasy contamination besides controlling dye bleeding and charging the protein fiber ionic positive for strengthening the attraction between the ionic negative tanning agent, dyestuff and fatliquor. Deflocculated and suspended soiling is towel extracted, thereafter rinse and pH balanced with Acidifier-2.0 to prevent the leather from reverting to rawhide. When leather feels sticky or slimy it is a sign of leather denaturing, a squeaky feel when wet is a sign of a healthy leather. Hydrator-3.3 relaxes stiff leathers and removes surface tension free from surface blotchiness prior to fat and oil replenishing. Fat and oil is replenished with Fatliquor-5.0 to rejuvenate the leather for the desired suppleness when dry. Custom redyeing commences prior to topcoat refinishing. Protector-B+ imparts a non-stick rub-resistant protection with a buttery-feel that shield against sticky soiling and reduce friction noises. Note that the mentioned product suffix number denotes its pH value in this holistic leather-safe aniline leathers dyestuff and topcoat refinishing system. Please email
[email protected] for custom matching services or choice of color: Antique-Brown, Black, Yellow, Orange, Red, Red-Brown, Rubine, Blue or Dark-Brown. And choice of topcoat luster: Gloss or Satin. This kit comes with reduced weight option to save on shipping thus the 250ml concentrate ratio such as Acidifier-2.0, Rinse-3.0, Hydrator-3.3 and Fatliquor-5.0 has to be cut or filled up with distilled water prior to use.