PDA

View Full Version : Bicast Sticky Problem – How to solve it?



Questions!
04-23-2014, 03:29 PM
How to solve this sticky problem?


#1
3068


#2
3069

Roger Koh
04-23-2014, 03:59 PM
Bicast / Bycast leather is split leather with a layer of polyurethane applied to the surface and then embossed. One common problem is the finish becomes sticky

Kit B7 is the recommended kit to solve the sticky issue.

From pictures #2
It looks like fabric remnants becomes stick to it and when sitting on it and getting up will hear a familiar peeling sound. The topcoat has deteriorated and will need a refreshing new application to solve the sticky problem as follows:

1st The surface soiling has to be removed and this is best done with Degreaser-2.2 working with the Eraser-4 to remove all sticking residue off with sponge extraction.
2nd Surface is rinse to a squeaky clean with Acidifier-2.0.
3rd When dry any roughness is sand accordingly.
4th Crosslinker-25 is transfer into the BicastTop-76G and mixed well before application of your choice, best is with a varnishing soft brush to reduce streaks. Airbrushing will give professional result.
5th Let dry in-between coats and sanding an option to smoothen the original roughness or surface undulating effect.
6th When dry Protector-B+ application will impart a smooth buttery-feel non-stick surface for immediately use when dry.


Roger Koh
Leather Care Consultant
www.LeatherDoctor.com




Product Information:


3070
Leather Doctor Kit B7 – Bicast Leather Sticky Refinishing Kit
Leather Doctor® Kit B7, bicast leather sticky refinishing kit is an innovative system developed to restore finishes sticky problem. The sticky problem is often described from owners as follows. The finish gone dull on the seating areas and any material comes in contact sticks to it. The finishes feels a bit rubbery but after 5mins of sitting clothing were stuck to it. The location that suffers tackiness also reveals roughness to the touch. When sitting down and getting up, there is the sound of tape pulling and you can actually see a pattern on the couch from the jeans. If these experiences sound familiar then this kit is the answer. Stripping the surface contamination is done with Degreaser-2.2 and the help of Eraser-4 for better traction to removed surface materials. Suspended soiling is towel extracted and rinse with Acidifier-2.0. 2000-grit sandpaper is used to smoothen rough surface. A 10% Crosslinker-25 is added to the BicastTop-76G for extra finish strength from stickiness. Protector-B+ imparts a non-stick buttery-feel against sticky soiling; a rub-resistant against friction wear and diffuses a leather scent that enhances leather sensuous and luxuriously. This kit comes with reduced weight option to save on shipping thus the 250ml concentrate ratio such as Acidifier-2.0 has to be cut or filled up with distilled water prior to use.

Houcter
05-03-2014, 12:57 AM
Clean it with Lexol or oil-based cleaner.