PDA

View Full Version : How to recondition sheep skin boots with 2 types of leather



Cathy
12-08-2013, 05:07 AM
Roger,

I purchased the hydrator 3.3 and fatliquor 5.0. Can I use them to recondition these boots? They seem to have 3 kinds of leather on them. I am most concerned about the part that is on top of the foot, as opposed to the higher part around the leg that doesn't get wet anyway. The inside has a layer of shearling/sheepskin. Perhaps it's all one layer only. I can't tell. To my eyes, it looks like there are 2 or 3 types of leather on the outside.

Could you please tell me how to recondition them?

See pictures.

Thanks.

Cathy

Roger Koh
12-09-2013, 11:11 AM
>>> Could you please tell me how to recondition them?

Hydrator-3.3 > Fatliquor-5.0 leather rejuvenating system is design for all leather types into the thickness of the leather structure to impart softness and tensile strength. In order to reach into the leather structure the leather surface has to be absorbent and is test or condition with Hydrator-3.3 for an even appearance prior to Fatliquor-5.0 replenishing them. Fatliquor-5.0 is repeatedly replenish each time the water contents evaporates leaving behind the fat and oil until the leather is fully saturated.


See general product information:


2261
Leather Doctor Hydrator-3.3

Leather DoctorŽ Hydrator-3.3 is a waterbased pH 3.3 leather-safe hydrator. It is a fatliquor preconditioner with multi functional abilities. Surface application is primary to check for even surface tension free of blotchiness prior to fatliquor replenishing. Structural application will require saturating to an optimum level with moisture oozing out when gently pressed between thumb and fingers.
The multi functional abilities include:
a) to check for surface tension for an even appearance free from blotchiness prior to fatliquor replenishing.
b) To plumps, relaxes and separates crushed, shrunk and stick together fibrils for manipulating away-unwanted creases and wrinkles.
c) To rectify alkaline overexposure areas by facilitating colloidal water movement to redistribute the leather constituents from surrounding areas.
d) To activate the dormant dyestuff within the leather structure for color refreshing.
e) To facilitates colloidal water movement within the inter-fibrillary spaces for wicking foreign soiling particulates to resurface.
f) To stabilize, pH balance and charge the protein fiber below its iso-electric point (pI) ionic positive to hydrogen bond with the ionic negative fatliquor more effectively. This universal Hydrator-3.3 is for all leather types including pigmented, aniline, vachetta, nubuck, suede, hair-on-hide and woolskin.

Instruction:

A. Surface Tension Inspection:
A1. Spray Hydrator-3.3 evenly and wipe with lint free towel to free of surface tension for an even appearance prior to fatliquor replenishing.

B. Stiffness, Creases and Wrinkles:
B1. Saturate the thickness of the leather to an optimum level with moistures oozing out when gently pressed between thumb and fingers.
B2. Cover up with plastic wrapping to control evaporation and let it dwell for softness.
B3. Manipulate by stretching and cross flexing to relax the leather prior to fatliquor replenishing.

C. Rectify Alkaline Overexposure:
C1. Saturate the thickness of the leather to an optimum level with moistures oozing out when gently pressed between thumb and fingers.
C2. Cover up with plastic wrapping to control evaporation and let it dwell for redistributing of the leather constituents from surrounding area.
C3. Observe for appearance and test by finger for tactile squeaky feel prior to fatliquor replenishing.

D. Activating Dormant Dyestuff to Resurface:
D1. Saturate the thickness of the leather to an optimum level with moistures oozing out when gently pressed between thumb and fingers.
D2. Cover up with plastic wrapping to control evaporation and let it dwell up to 72 hours for excess dyestuff to resurface.
D3. Remove plastic cover and let it natural dry to observe color improvement prior to fatliquor replenishing.

E. Removing Penetrated Stains:
E1. Saturate the thickness of the leather to an optimum level with moistures oozing out when gently pressed between thumb and fingers.
E2. Cover up with plastic wrapping to control evaporation and let it dwell up to 72 hours for foreign soiling particulates to resurface.
E3. Remove plastic wrapping, replace with tissue paper without airspace to trap stains as it dries instead of remaining on the surface.
E4. Peel tissue paper when crispy dry and erase with Eraser-4 or Eraser-5 for suede accordingly prior to fatliquor replenishing.


2262
Leather Doctor Fatliquor-5.0

Leather DoctorŽ Fatliquor-5.0, a micro emulsion of fat, oil and water is an anionic charged pH 5.0 fatliquor for rejuvenating all leather types. It relaxes coarse breaks, creases and wrinkles enhance suppleness and prevent cracking. It softens the leather with stretchability, compressibility and flexibility, while enhancing its rip tensile strength greatly. It is for replenishing the original fat and oil that diminishes thru sun-bleaching, ageing, heat and alkaline overexposure or cleaning. On application, the water-encased molecule breaks free when hydrogen bond attraction takes place between the fat and oil with the protein fiber. The excess free water content wicks out leaving a breathing space behind for leather natural transpiration. The fat plumps the leather with fullness from easily collapsing into creases and wrinkles during stress or flex, while the oil lubricates the fibers so that they slide over one another smoothly like millions of inter-connecting hinges. Thus helps to keep leather at its optimum physical performance and prevent premature ageing. This universal Fatliquor-5.0 is for all leather types including pigmented, aniline, vachetta, nubuck, suede, hair-on-hide and woolskin.

Instruction:

1. Apply Fatliquor-5.0 and redistribute with foam brush until saturation.
2. Repeat application each time water contents evaporate until fully saturated.
3. Drive remaining surface remnants free of milky fat and oil until it turns clear with Hydrator-3.3.
4. Allow natural drying for extra softness.

Tips:

1. When crispy dry, prior surface contaminations/damages may darkens as soiling particulates resurface.
2. Removes soiling particulates with Eraser-4 for all leathers including nubuck and Eraser-5 for suede.
3. Stretching the darken areas lightly will also lightens the appearance.



Roger Koh
Leather Care Consultant
www.LeatherDoctor.com