PDA

View Full Version : How to fix and prevent more peeling to this Bicast Leather?



Questions!
01-29-2013, 01:29 PM
I would really like to fix and prevent more peeling to happen but the cheapest way possible because it was a inexpensive couch.
What are the products that you offer?
Also, is this PU leather?


Do you have the directions on how to use the

Bicast Pigment-32

Bicast Dye-76

Bicast Topcoat-66G

I found some directions online but they are kind of confusing...

Thanks,
brad

#1
http://i300.photobucket.com/albums/nn4/Rogerkoh/Leather%20Upholstery/bicastPeeling-1.jpg

#2
http://i300.photobucket.com/albums/nn4/Rogerkoh/Leather%20Upholstery/bicastPeeling-2.jpg

Roger Koh
01-29-2013, 01:49 PM
These products are used in this sequence one after the other.

Bicast Pigment-32 > Bicast Dye-76 > Bicast Topcoat-66G > Protector-B+

1]
An art painting brush is recommended to apply the Pigment-32 on the peel areas.
Push the product beneath the peel as well and can be pressed with a wax paper.
A hair dryer is used for fast drying.
Apply after each layer has dry, until the grey color based is block out.
Ensure that loose peeling is also bond and pressed with wax paper back to place.

2]
Dye-76 is the transparent dye that will give the beauty of depth.
Apply with a bigger brush to even out the appearance.
Let dry in between coat until satisfaction.

3]
Topcoat-66G seals the above coloring that also imparts a glossy appearance that matches most bicast leather.
Let dry in between coat with help of hair dryer.

4]
Protector-B+
This is a non-stick, rub-resistant protection that will reduce the peeling problem from friction rubs.
Use this product as part of your routine care

Roger Koh
[email protected]