Prior to the pigment application it is wise to have an “Adhesion Coat” in the refinishing system.
There are two results that are both as important; namely Adhesion and Appearance.
For adhesion and better anchorage it is recommended that the first coating is applied by padding to ensure that it is micro-pile deep into the pores.
For appearance it is recommended that they are fine spray a panel at a time; and several thin layers is better than one thick layer.
Thereafter a matching topcoat applies.
I would recommend using the Semi-Aniline Refinishing System that uses Micro-Pigment for a finer finish.
Roger Koh
Leather DoctorŽ
|
07-22-2010
Threaded Mode