Degreaser-2.2 > Acidifier-2.0/Rinse-3.0 + Horsehair brushing + Eraser-5 + Towelling and repeat until satisfaction.
Please note that Degreaser-2.2 is not developed to remove wax.
Any unwanted surface is stripped together with the original finishes with Stripper-2.3 > Rinse-3.0 and will need refinishing again.
When using Stripper-2.3 the original finishes will be removed too.
Leather Doctor® Stripper-2.3 is a pH 2.3 residue free hydrocarbon formulated duality leather finish stripper with bleeding control. It is use to remove existing old finishes or overspray for all leather types.
Instruction:
1 Spray, agitate with stripping Brush-2 and or with leather Eraser-4 and extract with terry towel before it dries.
Tips:
A bristle detailing brush works into the grooves for a more thorough overall stripping unless the surface is without grain then Eraser-4 with its flat surface contact and efficient traction makes stripping much easier.
Horsehair Brush-1 is recommended for all smooth leathers without heavy surface finishes safe against grain damages. A stiffer stripping Brush-2 is recommended for heavier finishes, however always test against grain damages. Leather rejuvenating with Hydrator-3.3 > Fatliquor-5.0 system is mandatory thereafter to restore the suppleness of the leather structure. Stripping by wetting the leather structure and when dry thereafter will leave the leather stiffer and should be handle with care from cracking it. Leather rejuvenating after inspection with Hydrator-3.3 > Fatliquor-5.0 system is mandatory to restore any discoloration from migrating dyestuff if any and returning the suppleness of the leather structure to as soft as you wish.
