All repair areas will need to clear of surface strays fatliquor.
Spray Hydrator-3.3 horsehair brush and towel extract.
A dry blower may speed up the drying on those areas as well.
For weaken structure repairs, the Impregnator-26 is applied until the damaged areas is saturated prior to Bond-3D repairs.
To prepare for the repairs, missing fiber need to be replaced and this is taken from the suede side of any similar leathers.
Apply the bond to the worn areas and fill up with the suede fibers to fill it up working with a forceps and a leather tool or equivalent.
These are simultaneously combine action to fill, compress and smoothen while the repair dries with the help of a heat blower.
Color is added to the Bond-3D for deep repair during the few final touches for aesthetic, while shallow repairs are done with color mix.
You can show pictures of the repairs if you are doing it right.
Roger Koh
[email protected]