Results 1 to 1 of 1

Thread: Aniline Dyeing System (11)

  1. #1
    Join Date
    Feb 2007
    Location
    Greater Vancouver, Canada.
    Posts
    4,653

    Default Aniline Dyeing System (11)


    Aniline Leather Transparent Dyeing System (12):
    Dye:
    Black,
    Orange,
    Red,
    Red-Brown,
    Yellow,
    Dark-Brown,
    Rubine &
    Blue.
    Topcoat:
    Natural,
    Waxy Matte &
    Gloss.


    Leather Doctor® Aniline Dye-21
    Leather Doctor® Aniline Dye-21 is a transparent dyestuff that’s for staining absorbent naked aniline leather that includes the nappy nubuck and suede. Dyestuff is for staining the leather protein fibers and not the topcoat unless it can be easily penetrates through like pure aniline leathers, otherwise to coat over existing standard gloss aniline leathers an auxiliary adhesion promoter using Adhesor-73 is recommended.
    This is a new generation aqueous transparent staining aniline dyestuff that is more lively and brilliant than most liquid dyes.
    It’s to provide a more superior light fastness and fades resistance than most standard liquid dyes.
    For coating aniline leathers that has existing topcoating; add up to 30% Adhesor-73 to even out appearance.
    Standard colors available in Black-115, Orange-157, Red-180, Red-Brown-159, Yellow-128, Dark-Brown-124, Rubine-113 and Blue-119.
    This product is also available in concentrate to be cut with distilled water at a ratio of 1: 8.
    Thus a 120ml makes 1.14 quarts of Ready-To-Use product to save on shipping.
    Ready-To-Use packing sizes are available in 60ml, 250ml and in quart.
    Concentrate packing sizes are available in 120ml (1.14), 250ml (2.37) and quart (9 quarts).
    Email info@leatherdoctor.com for prices.
    Instruction:
    1] Prep clean - use Prep-4.4 follows by Cleaner-3.8 then Rinse-3.0.
    2] When prep clean using Degreaser-2.2 either rinse with Acidifier-2.0 for bleeding control or with standard Rinse-3.0.
    3] Inspection when dry – use leather Eraser-4 to remove wick-up soiling particulates.
    4] Shake well before application.
    5] For adhesion surface coating - add 10 to 30% Adhesor-73 (less is more natural).
    6] Airbrush to even out the color avoiding streaks or drips.
    7] Blow dry in-between coats until desired result is achieved.
    8] Leather rejuvenation – use Hydrator-3.3 follows with Fatliquor-5.0.
    9] Topcoat protection to match original luster - use Aniline Topcoat-89N(natural), Aniline Topcoat-59M (waxy matte) or Aniline Topcoat-79G (gloss).

    Aniline Topcoat
    It is these topcoats that decide its desired luster of gloss, matte or natural for restoring the original finish. Without this topcoat, the dyeing would be: a) poor in aesthetics such as bronzing hue and tactile sensation; b) susceptible to crocking when dry and bleeding when wet: c) poor physical properties such as wet rub, sweat resistant and scuff resistant; d) poor in ageing properties such as soil resistant and wet cleaning resistant. Note: Pure Aniline use Topcoat-89N with matching Protection-S+; Waxed Aniline use Topcoat-59M with matching Protection-W+; and Standard Aniline used Topcoat-79G with matching Protection-B+.

    Leather Doctor® Aniline Topcoat-89N
    It’s a natural finish for Pure-Aniline.
    This is an aqueous formulation aniline topcoat to protect aniline leathers naturally.
    It improves wet rub fastness and reduces bleeding.
    This product is also available in concentrate to be cut with distilled water at a ratio of 1: 25.
    Thus a 60ml makes 1.64 quarts of ready-to-use product to save on shipping.
    Ready-to-use packing sizes are available in 60ml, 250ml and in quart.
    Concentrate packing sizes are available in 60ml (1.64) and quart (26 quarts).
    Email info@leatherdoctor.com for prices.
    Instruction:
    1] Apply after Aniline Dye-21;
    1.a] otherwise prep clean - use Prep-4.4 follows with Cleaner-3.8 then Rinse-3.0;
    1.b] or degrease and rejuvenate after this sequece - Degreaser-2.2 > Rinse-3.0 > Hydrator-3.3 > Fatliquor-5.0
    2] Padding or airbrushing to produce an even appearance.
    3] Imparting a silky-feel, non-stick protection with a classic leather scent - use Protection-S+ (leather Scent-S).

    Leather Doctor® Aniline Topcoat-59M
    It’s a waxy-matte finish for upholstery aniline leathers.
    This is an aqueous fine particular size compact resin waxy-matte topcoat.
    It’s to protect aniline dyestuff with better wet rub fastness.
    This product is also available in concentrate to be cut with distilled water at a ratio of 1: 1.
    Thus a quart makes 2 quarts of Ready-To-Use product to save on shipping.
    Ready-To-Use packing sizes are available in 60ml, 250ml and in quart.
    Concentrate packing sizes are available in quart (2 quarts).
    Email info@leatherdoctor.com for prices.
    Instruction:
    1] Apply after Aniline Dye-21;
    1.a] otherwise prep clean - use Prep-4.4 follows with Cleaner-3.8 then Rinse-3.0;
    1.b] or degrease and rejuvenate after this sequece - Degreaser-2.2 > Rinse-3.0 > Hydrator-3.3 > Fatliquor-5.0
    2] Pad or fine spray without streaks or drips.
    3] Non-stick, rub-resistance waxy-feel protector with a classic leather scent - use Protection-W+ (leather Scent-W).

    Leather Doctor® Aniline Topcoat-79G
    It’s a gloss finish for upholstery Aniline leathers.
    This is an aqueous fine particular size urethane resin emulsion topcoat.
    It’s to protect aniline dyestuff with excellent toughness and flexibility.
    This product is also available in concentrate to be cut with distilled water at a ratio of 1: 1.
    Thus a quart makes 2 quarts of Ready-To-Use product to save on shipping.
    Ready-To-Use packing sizes are available in 60ml, 250ml and in quart.
    Concentrate packing sizes are available in quart (2 quarts).
    Email info@leatherdoctor.com for prices.
    Instruction:
    1] Apply after Aniline Dye-21;
    1.a] otherwise prep clean - use Prep-4.4 follows with Cleaner-3.8 then Rinse-3.0;
    1.b] or degrease and rejuvenate after this sequece - Degreaser-2.2 > Rinse-3.0 > Hydrator-3.3 > Fatliquor-5.0
    2] Pad or fine spray without streaks or drips.
    3] Non-Stick, Rub-Resistance buttery-feel protection with a classic leather scent - use Protection-B+ (leather Scent-B).
    Last edited by Roger Koh; 08-30-2012 at 01:10 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •