Wool, Hair & Fur Care (6):
Wool Degreaser,
Wool Cleaner,
Wool Rinse,
Hair & Fur Dry Cleaner and Sheen Conditioner,
Hair & Fur Dry Cleaner and Deodorizer &
Hair, Wool & Feather Moth Proofing Agent.

Leather Doctor® Degreaser-5.6
It’s for Hair-On-Hide and Wool of Woolskin, Sheepskin and Shearling leather types.
This is a pH 5.6 aqueous wool-safe degreaser.
It’s for degreasing traces of lanolin that may yellow or attract soiling like a magnet.
This is unlike other degreaser that once the grease is suspended it is rinse-free from being reabsorbed by the wool.
This product is also available in concentrate to be cut with distilled water at a ratio of 1: 40.
Thus a 30ml bottle makes 1.3 quarts of Ready-To-Use product to save on shipping.
Ready-To-Use packing sizes are available in 250ml and in Quart.
Concentrate packing sizes are available in 30ml (1.3 quarts), 250ml (10.83 quarts) and in Quart (41 quarts).
Email info@leatherdoctor.com for prices.
Instruction:
1] Identify, inspect, test and dry soil removal prior to application.
2] Spray evenly and agitate with Suede Brush-3.
3] Dwell 5 to 15 minutes for complete soil suspension to occur or before it dries.
4] Extract suspended soiling with dry absorbent towel.
5] Rinse with Wool Rinse-4.0 to a squeaky clean.
6] Groom and let to dry naturally.
7] When dry groom with a slick comb for a bloom.
Optional:
1] Whiten yellowed aged wool with d’Yellow-6.7.
2] Impart a non-stick silky feel with a classic leather scent – use Protection-S+.

Leather Doctor® Cleaner-5.5
It’s for Hair-on-Hide and Wool of Woolskin, Sheepskin, Shearling, Feather and all fabrics except rayon and silk.
This is a pH 5.5 aqueous wool-safe mild disinfectant cleaner.
It cleans gently by penetrating, lubricating and suspending soiling through chemical reaction.
This product is also available in concentrate to be cut with distilled water at a ratio of 1: 64.
Thus a 30ml bottle makes 2.06 quarts of Ready-To-Use product to save on shipping.
Ready-To-Use packing sizes are available in 250ml and in Quart.
Concentrate packing sizes are available in 30ml (2.06 quarts), 250ml (17.17 quarts) and in Quart (61.49 quarts).
Email info@leatherdoctor.com for prices.
Instruction:
1] Identify, inspect, dry soil removal and test prior to application.
2] To degrease – use Wool Degreaser-5.6
3] Shake well, spray evenly and agitate with Suede Brush-3.
4] Extract suspended soiling with dry absorbent towel until it shows clean.
5] Rinse remaining residue with Wool Rinse-4.0 to a squeaky clean.
6] Groom and let dry naturally.
7] When crispy dry, groom again with a slick comb for a bloom.
8] Impart a non-stick silky feel with a classic leather scent – use Protection-S+.

Leather Doctor® Rinse-4.0
It’s for Hair-on-Hide and Wool of Woolskin, Sheepskin, Shearling, Feather and all fabrics except rayon and silk.
This is a pH 4.0 aqueous wool-safe rinse.
It’s for rinsing, neutralizing and stabilizing wool and hair fiber pH chemistry integrity.
This product is also available in concentrate to be cut with distilled water at a ratio of 1: 80.
Thus a 30ml bottle makes 2.56 quarts of Ready-To-Use product to save on shipping.
Ready-To-Use packing sizes are available in 250ml and in Quart.
Concentrate packing sizes are available in 30ml (2.56 quarts), 250ml (21.4 quarts) and in Quart (81 quarts).
Email info@leatherdoctor.com for prices.
Instruction:
1] Spray and extract suspended soiling with dry absorbent towel until it shows clean.
2] Groom and let dry naturally.
3] When crispy dry, groom again with a slick comb for a bloom.
Optional:
1] Whiten yellow aged wool – use d’Yellow-6.7.
2] Impart a non-stick silky feel with a classic leather scent – use Protection-S+.

Leather Doctor® Fur-n-Hair-S
It’s for all hair-on-hides, feathers and furs of rabbit, squirrel, hamster, chinchilla, beaver, mink, sable, otter, seal, curly Persian, karakul, pony, kangaroo, opossum, wallaby, etc.
This is a safe waterless hair-on, fur and feather cleaner and conditioner with a pleasant leather scent.
It’s for effective removal of dirt, soot or grime and condition sheen it.
This product is available in 60ml, 120ml and 250ml.
Email info@leatherdoctor.com for prices.
Instruction:
1] Check for insect damages, skin brittleness, and damage skin or split seam prior to application.
2] Remove surface soil groom with suede Brush-3, compressed air or vacuuming is recommended.
3] Mist spray direct or by a damped soft white terry cloth.
4] Rub briskly into the direction of the fur.
5) Refold towel to a clean side when it becomes soiled.
6) Allow hair to dry overnight then groom with slick brush for a bloom.

Leather Doctor® Fur-n-Hair-D
It’s for all hair-on hide, feather and furs of rabbit, squirrel, hamster, chinchilla, beaver, mink, sable, otter, seal, curly Persian, karakul, pony, kangaroo, opossum, wallaby, etc.
This is a safe waterless hair-on-hide, feather and fur cleaner and deodorizer.
It’s for effective removal of dirt, soot or grime and deodorizing it.
This product is available in 60ml, 120ml and 250ml.
Email info@leatherdoctor.com for prices.
Instruction:
1] Check for insect damages, skin brittleness, and damage skin or split seam prior to application.
2] Remove surface soil groom with Suede Brush-3, compressed air or vacuuming is recommended.
3] Mist spray direct or by a damped soft white terry cloth.
4] Rub briskly into the direction of the fur.
5) Refold towel to a clean side when it becomes soiled.
6) Allow hair to dry overnight then groom with slick brush for a bloom.

Leather Doctor® MothProof-5.4
It’s for Hair-on-Hide, Woolskin, Sheepskin, Shearling, and Feather.
This is a pH 5.4 aqueous leather and wool-safe mothproofing agent.
It works by being absorbed into the skin and will slowly release vapors repelling insects causing damages.
This product is also available in concentrate to be cut with distilled water at a ratio of 1: 20.
Thus a 60ml bottle makes 1.33 quarts of Ready-To-Use product to save on shipping.
Ready-To-Use packing sizes are available in 250ml and in Quart.
Concentrate packing sizes are available in 60ml (1.33 quarts) and 250ml (5.54 quarts).
Email info@leatherdoctor.com for prices.
Instruction:
1] Identify, inspect, dry soil removal prior to application.
2] Thoroughly cleaned prior to application.
3] Apply only on “wet-able” leathers.
4] Shake well, groom and spray deep into the cleaned skin with help of a slick brush.
5] Let dry naturally, when dry, groom with a slick brush for a bloom.