Leather Doctor® Aniline Leather Care Kit-A.c
Contents:
Degreaser-2.2 – 60ml
Prep-4.4 – 60ml
Cleaner-3.8 – 250ml
Rinse-3.0 – 250ml
Hydrator-3.3 – 250ml
Fatliquor-5.0 – 250ml
Leather Scent-B – 120ml
Leather (horsehair) Brush-1 – 1pc
3” Poly-Brush® - 1pc
Washable Rags – 5pcs
To repair and strengthen the leather structure to smoothen it use Impregnator-26 as shown in this picture.
Leather Repairer (5)
Leather Doctor®
Impregnator-26
It’s a Leather Surface Repairer for Pigmented and Aniline leather types.
This is a protein compact resin blend compound impregnator.
It’s for impregnating worn leather grains and micro cracks.
It’s to seal, strengthen and leveling out uneven absorption for further coating process.
It fills and tightens with good leveling properties that is film forming for improve abrasion resistance.
This product is also available in concentrate to be cut with distilled water at a ratio of 1: 0.5.
Thus a quart makes 1.5 quarts of Ready-To-Use product to save on shipping.
Ready-To-Use packing sizes are available in 60ml, 120ml, and 250ml and in Quart.
Concentrate packing sizes are available in quart (1.5 quarts).
Email
[email protected] for prices.
Note:
For color skin repairs add colors accordingly up to ratio 1: 1.
Instruction:
1] Shake well, pad to saturate all weak and absorbent areas.
2] Concentrate on weak areas otherwise wipe off unnecessary excess to reduce buildup.
To have a strong foundation for the Metallic finish use this Adhesor-73
Leather Dyeing & Coloring Auxiliary (3)
Leather Doctor®
Adhesor-73
It’s an auxiliary for Pigmented and Aniline leathers refinishing.
This is an aqueous compact resin adhesion promoter to ensure proper adhesion prior to color coating.
It’s also used after WaxEffect8.6 prior to top coating.
This product is also available in concentrate to be cut with distilled water at a ratio of 1: 1.
Thus a quart makes 2 quarts of Ready-To-Use product to save on shipping.
Ready-To-Use packing sizes are available in 60ml, 250ml and in Quart.
Concentrate packing sizes are available in quart (2 quarts).
Email
[email protected] for prices.
Note:
Strip clean of foreign contamination prior to application – use Prep-7.7 > Cleaner-3.8 > Rinse-3.0.
Instruction:
1] Shake well, hand padding preferred to ensure better anchorage for non-absorbent leathers.
2] Fine airbrushing for absorbent leathers to reduce patchiness.
3] Let dry naturally or speed dry with blow dryer.
3] Proceed with choice of further coating.
This is the Metallic color effect in Silver-M19
Leather Doctor®
Metallic-98
It’s for fashion leather color effect.
This is an aqueous metallic secondary color effect.
Standard colors available in
Silver-M19,
Gold-M20,
Bronze-M21 &
Copper-M22.
This product is available in 60ml, 250ml and quart.
Email
[email protected] for prices.
Instruction:
1] Airbrush and let dry between coats until desired result.
2] Use gloss topcoat to match primary leather color types.
CENTER]
Semi-Aniline Leather Coloring System (12) Leather Doctor®