Results 1 to 3 of 3

Thread: waterbased leather aroma

  1. #1
    Join Date
    Sep 2010
    Location
    Southern Spain
    Posts
    4

    Default waterbased leather aroma

    Does anyone know of a supplier of 'leather aroma' product but a waterbased version?...

    I have always used the oil based product, but a friend on mine in NJ said he had heard of a waterbased version, but i cannot locate a supplier anywhere in Europe. At this point i would buy from the USA if i could just find where!

    any help would be appreciated.

  2. #2
    Join Date
    Feb 2007
    Location
    Greater Vancouver, Canada.
    Posts
    4,788

    Default

    We offer concentrates for private labeling; the below 5 products are all infused with oil-based “natural classic leather scent”.

    Their purpose is either for surface tactile-feel (buttery, draggy, silky or waxy), non-stick and rub-resistance conditioning or for structure scent-masking of inherent unpleasant leather smell originated mainly from “cottage tannery”.

    And oil-based scent last longer than water-based version; as it evaporates at a much slower rate up to 4 to 6 weeks on a typical napa leather jacket.

    Fatliquor LS-5.5 has two times more leather scent power infused into the fatliquor to mask the structure inherent smell for showroom upholstery, bags, and other unpleasant-smell leather products.


    Note:
    Oil-based scent is emulsified into a water-based end product in the above cases; thus classified as Water-Based.


    Email me for further details.


    Roger Koh
    info@leatherdoctor.org

    Leather Doctor® Leather Scent-B:
    It’s for Pigmented, Aniline and Oil Pull-up Nubuck leather types.
    This is a non-film forming, non-stick protector that enhances a soft natural buttery-feel with a classic leather scent that charms.
    It’s for imparting a non-stick breathable barrier essentially to shield the detrimental effects of sticky soiling including the nasty ballpoint ink.
    And for helping to release those tenacious dye-transfers stains especially on light colored leathers easily without resorting to unnecessary color refinishing.
    Its natural buttery-feel protection increases the leather resistance to wet and dry rubs, thus reduce stretch, scuff and abrasion.
    And it reduces friction squeaks that wear the finishes when leather rubs against leather during movement.
    Or friction that wear the finishes caused by getting in and out of auto especially the driver’s seat.
    Note:
    To reduce sheen and scent add Buttery Feel-76.
    Instruction:
    1] Identify, inspect and dry soil removal prior to application.
    2] Shake well, mist spray and spread evenly with a foam brush.
    3] Or spray and wipe with absorbent towel for quick easy care.

    Leather Doctor® Leather Scent-D:
    It’s for Aniline and Nubuck Wax Pull-up leathers, Bicast, Vachetta and Leather Flooring.
    This is a non-film forming, non-stick protector that enhances a draggy-feel with a classic leather scent that charms.
    It imparts a non-stick breathable barrier essentially to shield the detrimental effects of sticky soiling including the nasty ballpoint ink.
    And it does help to release those tenacious dye-transfer stains especially on light colored leathers easily without resorting to unnecessary color refinishing.
    Its natural draggy-feel protection increases the leather resistance to wet and dry rubs, thus reduce stretch, scuff and abrasion.
    It is also used as a scuff repairer, filling and concealing surface scuffs to improve appearance.
    The drag produces an unforgettable familiar sound sweet to the ears when leather rubs.
    Note:
    To reduce sheen and scent add Draggy Feel-79
    Instruction:
    1] Identify, inspect and dry soil removal before application.
    2] Shake well, mist spray and spread evenly with a foam brush.
    3] Spray and wipe with absorbent towel for quick easy care.
    4] Groom nubuck with Nubuck Brush-2 for a “finger writing effect”.

    Leather Doctor® Leather Scent-S:
    It’s for Pure-Aniline, Nubuck, Suede, Hair-On and Woolskin leather types.
    This is a non-film forming, non-stick protector that enhances a natural silky-feel with a classic leather scent that charms.
    It imparts a non-stick surface essentially to shield the detrimental effects of sticky soiling including the nasty ballpoint ink.
    And it does help to release those tenacious dye-transfer stains especially on light colored leathers easily without resorting to unnecessary color refinishing.
    Its natural silky-feel protection increases the leather resistance to wet and dry rubs, thus reduce stretch, scuff and abrasion.
    And it reduces friction squeaks that wear the finishes when leather rubs against leather during movement.
    Note:
    To reduce sheen and scent add Silky Feel-43
    Instruction:
    1] Identify, inspect and dry soil removal before application.
    2] Shake well, fine mists spray on cleaned surface (airbrushing is preferred to avoid spits).
    3] Groom nubuck with Nubuck Brush-2 for a “finger writing effect”.

    Leather Doctor® Leather Scent-W:
    It’s for waxed Aniline, Vachetta and split Suede leather types.
    This is a non-film forming, non-stick protector that enhances a soft natural waxy-feel with a classic leather scent that charms.
    It imparts a non-stick breathable barrier essentially to shield the detrimental effects of sticky soiling including the nasty ballpoint ink.
    And it does help to release those tenacious dye-transfer stains especially on light colored leathers easily without resorting to unnecessary color refinishing.
    Its natural waxy-feel protection increases the leather resistance to wet and dry rubs, thus reduce stretch, scuff and abrasion.
    And it reduces friction squeaks that wear the finishes when leather rubs against leather during movement.
    To reduce sheen and scent add Waxy Feel-47.
    Instruction:
    1] Identify, inspect and dry soil removal prior to application.
    2] Shake well, mist spray and spread evenly with a foam brush.
    3] Or spray and wipe with absorbent towel for quick easy care.

    Leather Doctor® Fatliquor LS-5.5
    It’s a structure conditioner pH 5.5 natural leather scent fortified fatliquor to mask inherent unpleasant leather smell with softness, strength and suppleness; for absorbent leathers like Semi-Aniline, Aniline, Veg-Tan, Nubuck and Suede types.
    Instruction:
    1] Shake well, foam brush or spray and ensure even absorption into the leather.
    2] Eliminate coarse breaks and creases - stretch it crosswise while damp.
    3] Achieve extra softness - natural slow drying is preferred.
    4] For desired softness - flex, stake or stretch it when dry.
    5] To enhance sensuously with a choice of buttery, draggy, silky or waxy non-stick, rub resistance conditioner - use leather Scent-B, D, S or W

  3. #3
    Join Date
    Sep 2010
    Location
    Southern Spain
    Posts
    4

    Default

    no we just need the waterbased aroma, as we already have a product line of our own

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •