Louis Vuitton Neverfull MM Damier Azur

[Question]

Hi there,

I need help!

I have a couple of beautiful bags with very heavy patina look where some parts look dirty.

Are you able to suggest a kit and a step process?

Thanks!

#1



#2



#3



#4

[Roger Koh]

>>> Are you able to suggest a kit

My recommendation is Kit V4, especially to remove the Body Oil, Grease, and Sweat darkening contamination.

https://leatherdoctor.com/vachetta-l...emover-kit-v4/

>>> and a step process or How to Restore Darkening Body Stain on Vachetta Leather?

Vachetta leather darkening stain by prolonged body oil, grease, and sweat has to be restored in a holistic dovetailing 8 sequence of steps:

1* Surface Soiling Removal.

2* Degreaser 2.2.

3* Vachetta Pro 1.2.

4* Acidifier 2.0

5* Hydrator 3.3.

6* Fatliquor 5.0.

7* Vachetta 2.8.

8* Protector D.

How to work with Degreaser 2.2, Vachetta Pro 1.5, and Acidifier 2.0 system?

1* Degreaser 2.2 has to be shaken to gel before use.

2* Degreaser 2.2 is transferred to Leather Brush 1 or Eraser 4 before working deep into the grease stain with brush agitation and eraser traction to remove surface soiling.

3* Suspended soiling is towel extracted and changing folding sides until the towel shows clean.

4* Vachetta Pro 1.2 is sprayed and work by brushing and erasing the stain out to the edge of the panel and towel extract until the change folding sides shows clean.

5* Acidifier 2.0 is sprayed and worked by brushing and erasing again and towel extract until change folding sides show clean. Continue with Hydrator 3.3 before the leather gets dry.

How to work with Hydrator 3.3 and Fatliquor 5.0 system?

1* Hydrator 3.3 is sprayed and worked by brushing and erasing again and towel extract until change folding sides show clean.

2* Hydrator-3.3 is again applied to plump softness and the leather creases, wrinkles, or stiffness if any is stake, massage, or flex to satisfaction and towel extract until change folding sides show dry.

3* Fatliquor 5.0 is sprayed and brushed into the leather to plump softness and let it dry.

4* Fatliquor 5.0 is repeatedly applied each cycle the water content dries until the last application when the leather absorbs no more ends the repeat application, and the leather is left for slow drying.

5* Fatliquor 5.0 remnant if any is driven into the leather or wiped off with Hydrator 3.3 and left to dry before redox treatment.

How to work with Vachetta 2.8?

1* Vachetta 2.8 is sprayed over the dried surface without a dry edge to avoid drying marks and left to dry for an oxidation-reduction chemical reaction to take effect.

2* The appearance is inspected and treatment may repeat accordingly.

3* Any surface drying residue is wiped away with Hydrator 3.3 and let to dry.

How to work with Protector-D?

1* Protector-D is sprayed and spread out with a lint-free towel let dry and the leather is ready to use.

Any questions you may have?


Roger Koh
Leather Care System Formulator
Consultant / Practitioner / Instructor / Coach
web: www.leatherdoctor.com
forum: www.leathercleaningrestorationforum.com
email: [email protected],
phone: 604 773 1878 (WhatsApp)