Results 1 to 6 of 6

Thread: Vanopdenbosh Pigmented Ottoman

  1. #1
    Join Date
    Aug 2008
    Posts
    619

    Default Vanopdenbosh Pigmented Ottoman

    Roger, We need to repair the ottoman, it has some cat scratch and a shallow slice which looks like it was scored with a razor blade. There are also a few paint spots or ink spots on it too.

    I want to order 1 quart of dye because she has matching furniture. I'm quite sure we want Micro-54, let me know after you get the sample.

    Name:  20181116_160021.jpg
Views: 24
Size:  3.35 MB
    11-16 A

    Name:  20181116_160032.jpg
Views: 24
Size:  2.84 MB
    11-16B Small shallow slice, not all the way through

    Name:  20181116_160050.jpg
Views: 24
Size:  3.65 MB
    11-16C Cat Scratch

  2. #2
    Join Date
    Feb 2007
    Location
    Greater Vancouver, Canada.
    Posts
    4,809

    Default

    >>> I'm quite sure we want Micro-54, let me know after you get the sample.

    Micro-54 is the closest from pictures, and most likely a satin topcoat MicroTop-54S would match as well, in this system: Adhesor-73 > Micro-54 > MicroTop-54S > Protector-B/B+.


    >>> picture - 11-16B Small shallow slice, not all the way through


    If possible, insert a flat plate below the repair, Bond with Bond-3D and weight it down to flatten down the perturbed edges to avoid any sanding when cured.


    >>> picture - 11-16C Cat Scratch

    Apply Bond-3D under the flap and press to flatten it.


    Online-Life-Coaching is now available at half hour session for a fee.

    Name:  RogerKoh-email.jpg
Views: 22
Size:  22.7 KB
    Roger Koh
    Leather, Skin & Hair Care System Formulator
    Consultant / Practitioner / Instructor / Online-Life-Coaching
    online store: www.leatherdoctor.com
    forum: www.leathercleaningrestorationforum.com
    email: roger@leatherdoctor.com

  3. #3
    Join Date
    Aug 2008
    Posts
    619

    Default

    What can a use between the leather repair and the weight that won't stick to the leather?

  4. #4
    Join Date
    Feb 2007
    Location
    Greater Vancouver, Canada.
    Posts
    4,809

    Default

    >>> What can a use between the leather repair and the weight that won't stick to the leather?

    I would use a smooth waxed paper from the reverse of self adhesion shipping labels.

    As for inserting a metal piece, this is only practical if there is opening especially for typical seat cushion.

  5. #5
    Join Date
    Aug 2008
    Posts
    619

    Default

    Name:  20190107_105212.jpg
Views: 12
Size:  2.90 MB
    01-07 A Color is way off, what should I use to bring it back

  6. #6
    Join Date
    Feb 2007
    Location
    Greater Vancouver, Canada.
    Posts
    4,809

    Default

    >>> 01-07 A Color is way off, what should I use to bring it back

    Use Thickener-48 up to 10% by weight.

    1- Make sure that the received custom color is mix very well as the heavier color had already sank to the bottom.
    2- Transfer to the spraying container and mix up to 10% of Thickener-48.
    3- Stir them up again at each interval to reduce color separation.
    4- Fast drying in between coats also reduce color separation.

    Let me know if further tips is necessary.

    Feed backs from your projects helps improves tips and recommendation.

    If you have time, go back and provides some feedback to your other threads to conclude that tips and recommendations were satisfactorily.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •