Results 1 to 3 of 3

Thread: Salvage LV vachetta & remove spots

  1. #1
    Join Date
    May 2017
    Posts
    1

    Default Salvage LV vachetta & remove spots

    Name:  image.jpg
Views: 2108
Size:  1.26 MB
    Roger, I have a few bags I'm trying to refurbish and I'm making them worse. I tried to clean the handles with magic eraser and Fiebiengs Saddle Soap. This turned the handlles more dull and dark. The cracks and dryness is still there. I used the same thing to clean spots on the rest of the vachetta leather. Please advise me on how I can fix this. The bags are dark and dull now and don't look clean. I'm not sure of the origin of the spots. The dirty handles are from years of use. I would like to get as close to the buttery leather look with some sheen. Than
    Last edited by [email protected]; 05-12-2017 at 09:49 AM. Reason: Pics weren't included

  2. #2
    Join Date
    Feb 2007
    Location
    Greater Vancouver, Canada.
    Posts
    5,102

    Default

    Let's go through the pictures that you send me here:

    #1
    Name:  image1.JPG
Views: 1517
Size:  1.35 MB


    #2
    Name:  image2.JPG
Views: 1572
Size:  1.32 MB


    #3
    Name:  image3.JPG
Views: 1609
Size:  1.30 MB


    #4
    Name:  image4.JPG
Views: 1511
Size:  1.10 MB


    #5
    Name:  image5.JPG
Views: 1568
Size:  1.10 MB


    #6
    Name:  image6.JPG
Views: 1493
Size:  1.12 MB


    #7
    Name:  image7.JPG
Views: 1580
Size:  1.42 MB

  3. #3
    Join Date
    Feb 2007
    Location
    Greater Vancouver, Canada.
    Posts
    5,102

    Default

    >>> Roger, I have a few bags I'm trying to refurbish and I'm making them worse. I tried to clean the handles with magic eraser and Fiebiengs Saddle Soap. The cracks and dryness is still there. I used the same thing to clean spots on the rest of the vachetta leather.

    Magic Eraser has an alkaline pH value when wet thus will darken vachetta leather. It is also abrasive, thus damages the leather grain and makes the leather more absorbent to soiling.

    Saddle soap with its high pH value will denatures the leather and the effect is the tell tale sign that the leather feels tacky or slimy just a stale fish, instead of a healthy squeaky feel when wet. Without pH neutralizing it will soon cracks the leather as the fatliquor leaches out or breaks its ionic bonds between the ionic positive (+ve) protein fiber and the ionic negative (-ve) fatliquor (fat and oil content). The soap scum also begins to attract soiling like magnets as what we see on our basin and bathtub.


    >>> This turned the handles more dull and dark.

    The dullness of the handles may be the work of the Magic Eraser used that wears out the grain surface. Use Eraser-4 instead.

    Darkness is due to the pH value being too high, above the leather average pH value of 3 for vegetable tanned leathers. Saddle Soap has a pH value above 10 - the leather now is under stress of alkaline overexposure.


    >>> The cracks and dryness is still there.

    Over leather dryness of its original fatliquor will lead to cracks. Leather suppleness will need to be restored up to the average 15% fat and oil moisture level prior to crack repairs, otherwise the crack will continue. Cracks leather structure may be strengthen with Impregnator-26 and repair with Bond-3D > Stucco-90. Such structural repairs will show as darkening effect and thus color camouflaging become eminent. Thus we are converting to “stimulated vachetta” with a Vachetta-84 > VachettaTop-84 > Protector-B+ (leather-scented) breathable coating finishes. The coloring returns back to its original light tan.


    >>> Please advise me on how I can fix this. The bags are dark and dull now and don't look clean. I'm not sure of the origin of the spots. The dirty handles are from years of use. I would like to get as close to the buttery leather look with some sheen.

    Picture #1 comments
    The leather strap tarnish stain from the hardware is removed using Vachetta-2.8 in a redox (reduction-oxidation) reaction.

    Picture #2 comment:
    Handles that are worn and compounded with Magic Eraser becomes more absorbent - Either it will need more regular maintenance with optimum fatliquor content to prevent ingress of liquid stain or a complete color refinishing. Comprehensive system include: Degreaser-2.2 > Acidifier-2.0 > Hydrator-3.3 for degreasing and pH balancing and structural cleaning of penetrated soiling. Leather rejuvenating include Hydrator-3.3 > Fatliquor-5.0 > Hydrator-3.3 system.
    Refinishing to “simulated vachetta” include: Vachetta-84 > VachettaTop-84 > Protector-B+.

    Picture #3 comment:
    Unknown stain removal may follow this sequence: Prep-4.4 > Degreaser-2.2 > Acidifier-2.0 > Hydrator-3.3 for degreasing and pH balancing and structural cleaning of penetrated soiling. Leather rejuvenating include Hydrator-3.3 > Fatliquor-5.0 > Hydrator-3.3 system. Refinishing to “simulated vachetta” include: Vachetta-84 > VachettaTop-84 > Protector-B+.

    Picture #4 comment:
    This browning discoloration may be rectify with VachettaPro-1.2 > Acidifier-2.0 > Hydrator-3.3 system. The product suffix denotes the pH value to pH balance for alkaline overexposure - Acidic lightens and Alkalinity darkens vachetta leathers. The darkening effect is unknown stain and grease or oil based stain darkens and will need to follow up with Degreaser-2.2 > Acidifier-2.0 > Hydrator-3.3 system in an attempt to work them out.

    Picture #5 & #6 comment:
    >>> I tried to clean the handles with magic eraser and Fiebiengs Saddle Soap. This turned the handles more dull and dark.
    Darkening effect may be rectified with Degreaser-2.2 + Eraser-4 > VachettaPro-1.2 > Acidifier-2.0 > Hydrator-3.3 system. Leather Rejuvenation with Hydrator-3.3 > Fatliquor-5.0 system follows with a combination “reverse-transfer” technique to trap foreign soiling through the towel-5 instead of remaining on its surface. Vachetta-2.8 redox (reduction-oxidation) treatment follows to lighten appearances. Option to refinish follows with Vachetta-84 > VachettaTop-84 > Protector-B+.

    Picture #7
    Browning Discoloration is rectify with VachettaPro-1.2 > Acidifier-2.0 > Hydrator-3.3 > Fatliquor-5.0 > Protector-D.

    See this Kit-V4 - Vachetta Leather Browning/Oil/Grease/Sweat Removal Kit. Other mentioned products is an add on for repairs and refinishing accordingly.

    Name:  Kit-V4.JPG
Views: 1450
Size:  1.40 MB

    http://www.leatherdoctor.com/kit-v4-...t-removal-kit/
    Leather Doctor® Kit-V4: Vachetta Leather Browning/Oil/Grease/Sweat Removal Kit incorporates the Degreaser-2.2 and Eraser-4 essential for the removal of common body oil, grease and sweat problems especially to the handles degrading from browning to darkening and eventual cracking. The main culprit is also the sweat that eventually cracks the leather sooner or later and routine care with rinsing using Rinse-3.0 helps pH neutralize the sweat, Sanitizer-3.9 has with a dual function for both pH neutralizing and sanitizing from off-gassing bacteria activities would be a better choice. Darkening appearance from body contact and browning from liquid stain are two main inevitable common problems associated with naked unfinished vachetta leathers. Leather being absorbent absorb and accumulates body moisture from contact and when neglected resulted in a darkening appearance. Besides appearance the sweat with traces of urea may cause the protein fiber from shifting ionic negative (-ve) manifesting as tackiness and reverting to rawhide. Degreaser-2.2 solves the darkening effect by penetrating, lubricating and suspending the soiling particulates and simultaneously protonate the protein fiber ionic positive (+ve). The amphoteric protein fiber is further rinse and ionic positive (+ve) charge with Acidifier-2.0 to strengthen the ionic attraction between its other non-amphoteric ionic negative (-ve) leather constituents like the tanning agent and the fatliquor. This dual duty removes the unwanted soiling particulates and pH balance the pH chemistry integrity of the leather at the same time. Vachetta Leather Browning, blotchiness or discoloration is associated with general accumulation of liquid soiling and will require VachettaPro-1.2 > Acidifier-2.0 system to remove and also to pH balance alkaline over-exposure that cause the browning discoloration. Alkaline pH sensitive Vachetta leathers when neglected often suffer unsightly browning stain marks from a variety of liquid sources. Even apparent clean rain or tap water often leaves a lightening spot with an outer ring. The pH 7 alone of water will often cause a rippling effect on the tannin that destabilize and causes it to moves. The higher the pH value above water the darker the browning stain becomes. Browning correction is performed in two stages, a pre-cleaning and a post-treatment. Pre-cleaning soiling removal in combination with pH balancing the leather structure improves appearance and returns the pH chemistry integrity to its original pH neutral of between 3 and 5. When pre-cleaning becomes satisfactorily it is essential that leather rejuvenating continue while the leather is about 25% combine moisture level or terry towel extract until the towel shows dry. The reason being that when leather is wet and dry without sufficient fatliquor it will shrink and in extreme cases cracks when dry with insufficient fatliquor. A 15% of fat and oil moisture read with a leather moisture meter or equivalent when perfectly dry without the water content is a healthy leather and would never crack. Leather rejuvenating with Hydrator-3.3 > Fatliquor-5.0 > Hydrator-3.3 is a 1st-step hydrating the leather structure of stiffness and separates any stick together leather fibrils free or preconditioning it prior to the 2nd-step of fatliquor replenishing it. 5/6 of the fatliquor water contents will evaporates and only leaves 1/6 of the remaining fat and oil, the fat plumps the leather with fullness and the oil lubricates the fibrils like millions of interlocking hinges for sliding over one another for suppleness with softness and tensile-strength from breaking. A fully saturated fat and oil with breathing pores makes the natural leather less absorbent to any liquid ingress. The 3rd-step is to remove any fatliquor fat and oil remnants that turns milky again from the leather surface with Hydrator-3.3, and preferably to move it into the leather instead with the horsehair Brush-1. A slow drying will produce a softer leather and flexing or massaging it while almost dry also helps in extra desired suppleness. The leather is scrutinized once again when dry for discoloration or undesired sun-tanning or ageing effect. It is then rejuvenated with a redox (reduction-oxidation) treatment using Vachetta-2.8. It is applied, brush and towel extract until towel shows clean. The final treatment is to even out and let to dry naturally for the product to take effect. Any powdery residue is wiped off with Hydrator-3.3 and let slow dry again. Protector-D enhances a rub resistant draggy-feel against friction rubs and is use routinely to conceal and fill scuffmarks. Body contact areas should be clean routinely with Clean-3.8 follows with Rinse-3.0 or Sanitizer-3.9, thereafter applied with non-stick protection and commence for another cycle of use. Darken and prolong body grease and sweat contacts will require a degreasing process with Degreaser-2.2 > Acidifier-2.0 system in most cases. Preventive cleaning and protection to shield against sticky soiling, with the abilities to heal and conceal lightening scuff and abrasion marks keeps the leather appearance level high at all times rather than relying on corrective or salvage cleaning where the cleaning appearance deteriorates and diminishes with each cycle. Note that the mentioned products suffix numbers denotes its pH value in this holistic approach to removing vegetable, plant and water stains from vachetta, saddlery and veg-tan leathers.

    Tips 1 – Cracks Control:
    Aged, dried or signs of leather cracking should be first leather rejuvenated with Hydrator-3.3 > Fatliquor-5.0 > Hydrator-3.3 system and let dry prior to Vachetta-2.8 treatment. This precaution is to prevent any further cracking accelerated to the leather. In other words, any leather dryness less then 7% of original fatliquor moisture content measured with a leather moisture meter or an equivalent wood moisture meter should first be rejuvenated to top up or replenish to its original fatliquor up to 15% prior to treatment with Vachetta-2.8. Due to “Van der Waal or London Forces” phenomenon in the drying process, the empty or insufficient of fatliquor in the leather fiber structure is likely to result in stiffer leather as the fibers becomes stick together. A slower natural drying will reduce the stiffness ill effect from the lack of fatliquor

    Tips 2 – Appearance Control:
    Water stain spotting may be done with a cotton swab until it shows clean. It is recommended that the entire panel be treated equally to an even appearance to eliminates any rings when dry thereafter. Treated panel may take up a lightening effect as it also reduces the sun tanning effect if any and recommend that the entire article be treated accordingly. Always pre-clean with VachettaPro-1.2 > Acidifier-2.0 prior to post-treatment with Vachetta-2.8 so as not to over-clean it too early.

    Tips 3 – Suppleness Control:
    Unlike other leather tanning type, vegetable-tanned leathers are more susceptible to cracks as it is characteristically more fatliquor thirsty. Dry leathers are handle with care for inspection and continue with rejuvenating it with Hydrator-3.3 > Fatliquor-5.0 > Hydrator-3.3 system.

    Tips 4 – Sealing and Concealing Scuffing Control:
    The final of the holistic Vachetta care system ends with Protector-D or the leather scented version of Protector-D+ to seal and conceal scuffing leaving the leather with its natural transpiration. For a lighter appearance "D" is recommended.

    Instruction:

    A- Degreasing with Degreaser-2.2 > Acidifier-2.0 > Hydrator-3.3 system:
    A1- Dry soil removal with Eraser-4. A2- Apply Degreaser-2.2 and agitate with horsehair Brush-1 or Eraser-4 and towel extract until towel shows clean. A3- Rinse off remaining residue with Acidifier-2.0 until towel shows clean. A4- Penetrated soiling are remove with the help of Hydrator-3.3 by saturating the leather structure and cling wrapping to control evaporation for up to 72hrs with replenishing the moisture high so that lodge soiling becomes loose. Plastic wrapping is replace with Towel-5 wrapped taut and tight without airspace so that soiling will reverse-transfer to the towel during the drying process and peel off. However, if leather has already shows evident of cracking, then it is highly recommended that Fatliquor-5.0 is replenished with repeat almost drying cycle and only at the least replenishment Towel-5 is introduced for the reverse transfer. Note that when leather becomes wet and dry again it will dry stiffer without any fat and oil and may accentuate the cracking effect. Also note that to have a more supple leather it is recommended that they are gently flexed or massaged from almost dry to dry to produce a softer leather. However on a combination issue with browning discoloration issue on the same panel VachettaPro-1.2 may be inserted into the combine ‘wet’ system as Degreaser-2.2 > VachettaPro-1.2 > Acidifier-2.0 > Hydrator-3.3 > Fatliquor-5.0 > Hydrator-3.3 system before it dries follows with the final ‘dry’ treatment of Vachetta-2.8 and ends with Protector-D in Kit-V4 holistic system.

    B- Browning Discoloration Removal with VachettaPro-1.2 > Acidifier-2.0 system:
    B1- Dry soil removal with horsehair Brush-1: terry towel or optional Eraser-4 depending on soiling severity prior to product application. B2- Pre-cleaning with VachettaPro-1.2: spray and saturate evenly with simultaneous agitation from horsehair Brush-1 and/or optional Eraser-4 for an even appearance and towel extract until it shows clean. Another option is to use a saturate cotton swab or a terry towel to do a test cleaning until it shows clean. Extend cleaning to the entire panel without leaving any dry area until towel shows clean for an even appearance. B3- Rinsing with Acidifier-2.0: spray and agitate with horsehair Brush-1 and towel extract until it shows clean. Proceed with Hydrator-3.3 while the leather is still damp.

    C- Hydrating with Hydrator-3.3:
    Hydrator-3.3 is evenly applied, agitated and spread with horsehair Brush-1 or FoamBrush-3” and towel extract for an even appearance prior to Fatliquor-5.0. Proceed with Fatliquor-5.0 while the leather is still damp.

    D- Fatliquor Replenishing with Fatliquor-5.0:
    Fatliquor-5.0 is a continuous process that proceeds immediately after satisfactory Hydrator-3.3 appearance inspection.The process is repeated when the leather is almost dry until the leather is saturated before it is let to a slow natural drying process. It will take up a seasoning effect in relation to the amount of fatliquor intake. 15% of fat and oil moisture level without any water content is the optimum moisture level when the leather is completely dry. Fat and oil moisture content is measurable with a leather moisture meter or equivalent. Penetrated stains are further fully saturated with Hydrator-3.3 allowing for structural water movement to floats or wicks any soiling particulates to the surface. The entire surface may be cling wrapped to control evaporation keeping at the highest level of moisture content for up to 72hrs. The cling wrapper may be removed and wicks up soiling towel extracted until towel shows clean. Fresh application is applied and ‘reverse-transfer’ technique with Towel-5 replaces the cling wrapper. Air bubbles or spaces is work out taut or stretch-tight with horsehair Brush-1 and let to dry. As the surface dries and the Towel-5 shrinks it will wick all water contents bringing soiling particulates through the Towel-5. It is then peel off the surface trapping the soiling particulates.

    E- Redox (reduction-oxidation) treatment with Vachetta-2.8:
    Product may be adjusted with distilled water to match desired appearance. E1- This product is highly recommended to treat leather after drying from Hydrator-3.3 > Fatliquor-5.0 > Hydrator-3.3 system. E2- Shake well, spray and saturate with horsehair Brush-1 or FoamBrush-3” for an even appearance and towel extract until it shows clean. E3- Extend cleaning to the entire panel when towel shows clean for an even appearance working out line or rings to an even appearance without leaving any dry area. E4- Let natural drying and inspect result. E5- Note: In most cases the treated panels will look lighter than other untreated panels, as the product not only corrects discoloration, it also reduces any ageing or sun-tanning effect (adjustment is made by an initial test and adjust product concentration accordingly with distilled water ratio 1: 1). The entire article is therefore recommended to be treated accordingly for an overall appearance.

    F- Sealing and Concealing Light Abrasion and Scuffing with Protector-D:
    Protector-D is applied for sealing and concealing light abrasion and scuffing, besides shielding the leather from the detrimental effect, soiling is becomes easier to remove during the routine care.


    Roger Koh
    Leather Care System Formulator
    Consultant / Practitioner / Instructor
    web: www.leatherdoctor.com
    forum: www.leathercleaningrestorationforum.com
    email: [email protected]
    Last edited by Roger Koh; 05-15-2017 at 06:51 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •