Results 1 to 2 of 2

Thread: Water stained aniline wax pull up

  1. #1
    Join Date
    Jun 2016
    Posts
    25

    Default Water stained aniline wax pull up

    Roger,
    This sofa was damaged by water. Is there a way to remove the water stains? Can it be redyed with aniline dyes and reproduce the wax pull up pateena? What products and procedures do I use?
    Thank you for your help.
    Frank
    Name:  IMG_4688.JPG
Views: 83
Size:  1.17 MBName:  IMG_4690.JPG
Views: 81
Size:  1.13 MBName:  IMG_4689.JPG
Views: 79
Size:  1.67 MB

  2. #2
    Join Date
    Feb 2007
    Location
    Greater Vancouver, Canada.
    Posts
    4,810

    Default

    >>> This sofa was damaged by water.

    Are you aware of the “Categories of Water in Water Damages?
    Category 1 - Clean Water
    Category 2 - Gray Water
    Category 3 - Black Water


    >>> Is there a way to remove the water stains?

    Assuming it is from Cat-1 Clean Water - then the stains are pH related and can be restored by working with Hydrator-3.3 to re-balance its appearance. However, foreign soiling has to be removed accordingly. Example water may pick-up residues example from the wooden structure that need to be redox (reduction-oxidation) treatment with CleanTannin-3.5 or any metal treatment with CleanTarnish-1.3 > Basifier-8.8 system.

    Cat-2 & Cat-3 cleaning up would include microorganism treatments with KillBateria-3.7 and potential mold control with KillMold-3.6


    So here are the sequence of steps:

    1st - Restorative or Corrective Cleaning with CleanPro-1.5 > Rinse and pH balance with Acidifier-2.0 system.
    2nd - Antimicrobial treatment with KillBateria-3.7 and Mold control with KillMold-3.6 system
    3rd - Dyestuff redistribution with Hydrator-3.3 system.
    4th - Leather rejuvenating with Hydrator-3.3 > Fatliquor-5.0 system


    >>> Can it be redyed with aniline dyes

    There are options to revive appearance and reactivating the dormant dyestuff is one first option.
    Aniline-21 “staining” dyestuff is the second option follows by redistribution with Hydrator-3.3 system.
    Aniline-76 “coating” dyestuff is for surface coating and even out appearance with better control.
    AnilineTop-76G is the sealing or topcoat that locks in the dyestuff from bleeding or crocking.
    Protector-D or D+ is the rub-resistant protector that matches this aniline finishes.


    >>> and reproduce the wax pull up pateena?

    Wax pull-up effect is renewed or rejuvenated with EffectWax-8.6 (the secondary structure conditioner).

    Use this Aniline (A.w) Wax Pull-up Leather Problem Solving Matrix for reference.
    Name:  aniline-a.pw-pull-up-wax.jpg
Views: 76
Size:  355.5 KB

    Roger Koh
    Leather Care System Formulator
    Consultant / Practitioner / Instructor
    web: www.leatherdoctor.com
    forum: www.leathercleaningrestorationforum.com
    email: roger@leatherdoctor.com

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •