Roger,
This sofa was damaged by water. Is there a way to remove the water stains? Can it be redyed with aniline dyes and reproduce the wax pull up pateena? What products and procedures do I use?
Thank you for your help.
Frank
Roger,
This sofa was damaged by water. Is there a way to remove the water stains? Can it be redyed with aniline dyes and reproduce the wax pull up pateena? What products and procedures do I use?
Thank you for your help.
Frank
>>> This sofa was damaged by water.
Are you aware of the “Categories of Water in Water Damages?
Category 1 - Clean Water
Category 2 - Gray Water
Category 3 - Black Water
>>> Is there a way to remove the water stains?
Assuming it is from Cat-1 Clean Water - then the stains are pH related and can be restored by working with Hydrator-3.3 to re-balance its appearance. However, foreign soiling has to be removed accordingly. Example water may pick-up residues example from the wooden structure that need to be redox (reduction-oxidation) treatment with CleanTannin-3.5 or any metal treatment with CleanTarnish-1.3 > Basifier-8.8 system.
Cat-2 & Cat-3 cleaning up would include microorganism treatments with KillBateria-3.7 and potential mold control with KillMold-3.6
So here are the sequence of steps:
1st - Restorative or Corrective Cleaning with CleanPro-1.5 > Rinse and pH balance with Acidifier-2.0 system.
2nd - Antimicrobial treatment with KillBateria-3.7 and Mold control with KillMold-3.6 system
3rd - Dyestuff redistribution with Hydrator-3.3 system.
4th - Leather rejuvenating with Hydrator-3.3 > Fatliquor-5.0 system
>>> Can it be redyed with aniline dyes
There are options to revive appearance and reactivating the dormant dyestuff is one first option.
Aniline-21 “staining” dyestuff is the second option follows by redistribution with Hydrator-3.3 system.
Aniline-76 “coating” dyestuff is for surface coating and even out appearance with better control.
AnilineTop-76G is the sealing or topcoat that locks in the dyestuff from bleeding or crocking.
Protector-D or D+ is the rub-resistant protector that matches this aniline finishes.
>>> and reproduce the wax pull up pateena?
Wax pull-up effect is renewed or rejuvenated with EffectWax-8.6 (the secondary structure conditioner).
Use this Aniline (A.w) Wax Pull-up Leather Problem Solving Matrix for reference.
Roger Koh
Leather Care System Formulator
Consultant / Practitioner / Instructor
web: www.leatherdoctor.com
forum: www.leathercleaningrestorationforum.com
email: [email protected]
There are currently 1 users browsing this thread. (0 members and 1 guests)