8-18a
8-18b
8-18c faded arm
8-18d ink
8-18e food
8-18f
8-18a
8-18b
8-18c faded arm
8-18d ink
8-18e food
8-18f
Questions?
12-21A
Ink still remains after several attempts. I can dye over it unless you have a suggestion. It is still wet around it, I'm using hydrator and the razor to feather out the ring.
12-21B
The dark spot is near the front of a bottom cushion, I'm using hydrator and razor to try and break it up. It looks better but if you have a suggestion let me know.
Roger we were going to use the same finishing technique that we described in the "Singer" thread. this leather looks and feels the same, but a different color.
12-21 C
Micro54 looks good
12-21D
Aniline-76 looks too red
12-21E
Mixed with "Avripas" Aniline 76 looks to be a good match
>>> 12-21A
Ink still remains after several attempts.
Ink has penetrated below surface.
Prep-7.7 with help a smooth agitation with a ball-tip spatula or edge of a smooth teaspoon will help suspense or disperse the stain. Clean-3.8 > Rinse-3.0 with similar smooth agitation below surface helps.
>>> I can dye over it unless you have a suggestion.
If dyestuff is darker then the remaining stain, its OK, otherwise it may show through or back up gradually.
Alternatively is lineal touch up with Micro-54 white and lineal cover up with Micro-54 Matching color.
>>> It is still wet around it, I'm using Hydrator-3.3 and the Razor-60 to feather out the ring.
Use some stimulating or massaging effect to better disperse the suspended stain.
>>> 12-21B
The dark spot is near the front of a bottom cushion, I'm using Hydrator-3.3 and Razor-60 to try and break it up. It looks better but if you have a suggestion let me know.
Use bamboo skewers or tooth prick to dislodge the remaining stains.
Let me know if it works at this stage.
Color looks too red
12-21 F
close up with original swatch
12-21 G
another close up in a different area
No flash
With Flash
The new color looks red / orange compared to original. We did not dye the back side of cushions. The color difference doesn't show up on the pictures like it does in our shop.
>>>
The new color looks red / orange compared to original. We did not dye the back side of cushions. The color difference doesn't show up on the pictures like it does in our shop.
A 5% to 10% of Ochre added to the color will bring it close, for information.
There are currently 1 users browsing this thread. (0 members and 1 guests)