Hermes - Amazonia - Repair, Restore and Redye

[Zippy14u]

>>> A lot of the cracks have smoothed out, some cracks still look rough with a smooth texture. This might be the best I can do. Will do one more application to see if it changes (the rougher areas) If not, it will be the best I can do.

Severe cracks will require repairs from a combination of Bond-3D + Stucco-90 + Anilne-76 – mixed up, fill-up, and level up with a plastic card and wipe off surface excess. Repeat each time as the water contents evaporates and the filling shrinks. When all smooth out (sanding with 1500/2000 grit), Adhesor-73 application will seal and balance out the absorbency rate ready for Aniline-76.

Finished with the Adhesion-76. Finally have the Bond-3D + Stucco-90 + Anilne-76 to work on the rough and cracked areas. Will wait for how to instucitons.