Connoly- Very worn seat and back cushions previously dyed.

Roger, a client brought in these chairs, after we started cleaning them it became apparent that they were previously dyed. The finish coat was coming off easily after we allowed Prep 7.7 to dwell overnight and cleaned. So we repeated until all secondary dye came off.
I then wet sanded with 600 grit and rinsed thoroughly.
I need to fill and repair the damaged areas, what should we use and how to do the repair work.

Attachment 6279
4-4A During cleaning, chair on left was Prep7.7 and the chair on right was cleaned thoroughly.

Attachment 6280
4.4B Close up of chair with prep7.7 on it. you can begin to see where color is stripping off.

Attachment 6281
4.4C Worse cushion, has cracking and damage.

Attachment 6282
4.4D Close up of damage

Attachment 6283
4-4E another close up of damage.

>>> I need to fill and repair the damaged areas, what should we use and how to do the repair work.

1 – When damaged areas becomes absorbent visibly having a darkening effect when dry – recommend they are rejuvenated with Hydrator-3.3 > Fatliquor-5.0 > Hydrator-3.3 system.

2 – Light repair use Adhesor-73

3 – Heavy repair use Bond-3D with less Stucco-90 for better flex strength from cracking.