-
8 Attachment(s)
Shapland Aniline Chairs
Attachment 8308Attachment 8307Attachment 8309Attachment 8310Attachment 8311Attachment 8312Attachment 8313Attachment 8314
We have these chairs that had severe oil spots. I was able to remove all of the oil for now. It has been cleaned and hydrated. What should we use to dye this. Any other recommendations?
-
>>> We have these chairs that had severe oil spots. I was able to remove all of the oil for now.
What have you used to removed these oil spots?
>>> It has been cleaned and hydrated. What should we use to dye this. Any other recommendations?
1- Balance up the color difference with Aniline-21 (probably a mix of orange and yellow).
2- Use Hydrator-3.3 to redistribute the color evenly.
3- While still damp Replenish with Fatliquor-5.0 for suppleness when dry.
4- Dry preparation.
5- Refinishing with Antique-27 as an option to further even out the color difference and proceed with Aniline-76 for a final appearance.
6- Topcoat with AnilineTop-76G
7- Protect with Protector-B/B+
Roger Koh
Leather & Acne Care System Formulator
Consultant / Practitioner / Instructor / Coaching
web: www.leatherdoctor.com
forum: www.leathercleaningrestorationforum.com
email: [email protected]
-
We are sending you a swatch for color match. Please call or email us when you get the sample so we can discuss how much of each dye we will need to make this repair.
-
Matching both Antique-27 and Aniline-76?
-
-
Your Email decision is a quart both for Micro-54 (opaque) and Aniline-76 (transparent) - correct?
-
Yes, we need one of each. Its a common color so we can use the extra in future projects.
-
PayPal invoice send on 26-Apr-18, still waiting for your confirmation.
-
3 Attachment(s)
Attachment 9259
3-4 A Chair after we dyed it the first time, color is off and too much micro54 so it didn't look right.
Attachment 9257
3-28A Finished chair
These chairs were finished 6 months ago but improperly dyed so we completely re-stripped and refinished again. We used Aniline 21 to bring back as much color as possible then Micro 54 to even up damaged areas with several colors then used Aniline -76 reddish tone and then a dark tone with airbrush and sponge to get the 2 tone effect. Final topcoat with Aniline 76.
Attachment 9258
3-28B close up of wrose arm, dramatically improved but not perfect.
-
My recommendation for color matching is to have it done in-house for better control.