PDA

View Full Version : How to Remove Oil Stain from Nubuck Bag?



mu young cho
08-19-2010, 07:09 AM
How do the oil stain nubeok bag?

Oil is buried at the airport.

Goods from the conveyor belt is thought to grease stain.

1. Degreaser-2.2
2. Prep-4.4
3. Cleaner-3.8
4. Rinse-3.0

1-4 times a change process, but not satisfactory.

How do I

Roger Koh
08-19-2010, 12:27 PM
Picture #2 & #3 shows that this is a Pigskin suede.

Unlike other skin, pigskin has hair follicles and the oil has soaked through these holes through the thickness of the skin that makes degreasing more difficult.

It will be removed.

This is how you do it.

You only need Degreaser-2.2 follows with Rinse-3.0.

Step 1:
Shake Degreaser-2.2 until it gels, apply and lightly agitate with nubuck Brush-2 into the thickness of the leather.
Let it dwell about 15 minutes, apply again, agitate and extract with towel until towel shows clean.

Step 2:
Apply Rinse-3.0 to soak into the leather, agitate and extract until towel shows clean and leave it slow dry to allow the suspended oily particulates to move to the surface.

Step 3:
When it is dry, use hair dryer to make it crispy dry, then use Nubuck/Suede Eraser-5 and eraser off the wicked-up residue.

Step 4:
Inspection for result, if it is not to your satisfactorily repeat Step 1 and 2 again.


Let’s see some pictures of your progress.


Posting better quality pictures see this thread: http://www.leathercleaningrestorationforum.com/forum/showthread.php?t=148

Roger Koh
[email protected]

mu young cho
08-22-2010, 02:27 AM
Hi Roger

I tried many times, did not want to succeed.

And multiple drug use is the leather surface, become severely damaged.

Furthur with other drugs to handle?

http://i816.photobucket.com/albums/zz81/my0075/SV300181.jpg
http://i816.photobucket.com/albums/zz81/my0075/SV300180.jpg
http://i816.photobucket.com/albums/zz81/my0075/SV300179.jpg

Roger Koh
08-22-2010, 01:59 PM
Try another method:

Step 1]
Use nubuck Brush-2 and Nubuck Eraser-5 to brush and erase the stain; to remove some wick-up soiling.

Step 2]
Apply Prep-4.4 and agitate with nubuck Brush-2; let it dwell 30 minutes.

Step 3]
Apply Cleaner-3.8 agitate and vacuum off with a wet vacuum cleaner.

Step 4]
Apply Rinse-3.0 and vacuum off with a wet vacuum cleaner.

The suction of the vacuum cleaner may help to pull up the carbon that is stuck with the fiber.

Lay a tissue paper and thick towel on top of the tissue and put a heavy object to weight it down and leave it to dry (this again is to help the stain to wick up to the extended tissue paper).

Stet 5]
When dry, brush and erase the stain area and then the entire panel to even out the appearance.



You can mail it to me, and I will do it for you; if you wish.


Roger Koh
[email protected]